User manual

Publication 1734-UM011A-EN-P - February 2004
Configure the 1734-AENT for Direct Connection in RSLogix 5000 4-9
The Select Module Type window will open.
2. Select the 1734-OW2/C relay output module from the list and click on
OK.
The Module Properties window will open.
3. We used the following values:
TIP
At the bottom of the Select Module Type screen, you can
choose Clear All and then select a type of module (analog,
digital, specialty) to narrow your search.
Name POINT_Relay_Output
Slot 1
Comm Format Output Data
Electronic Keying Compatible Module
Revision 3.1