User manual

Publication 1734-UM011A-EN-P - February 2004
4-12 Configure the 1734-AENT for Direct Connection in RSLogix 5000
The Module Properties window will open.
10. We used the following values:
11. Click the Next button.
12. Leave 10 ms. as the RPI for the 1734-OV4E module.
13. Click on the Finish button to accept the configuration. The I/O
Configuration in the Project window should look similar to the one
shown below.
Name POINT_Digital_Output
Slot 2
Comm Format Output Data
Electronic Keying Compatible Module
Revision 3.1