User manual

Publication 1734-UM011A-EN-P - February 2004
7-2 Safety Approvals and Specifications
Specifications
Specifications information for the 1734-AENT is below.
Specifications - 1734-AENT EtherNet/IP Adapter
Expansion I/O Capacity Maximum of 63 modules
Maximum of 5 Rack Optimized connections (for digital
modules only)
Maximum of 25 direct connections
1734-AENT backplane current output = 1.0A.
The actual number of modules can vary. Add up the
current requirements of the modules you want to use to
make sure they do not exceed the amperage limit of 1.0A
for the 1734-AENT.
Backplane current can be extended beyond 1.0A by
using 1734-EP24DC backplane extension Power
Supplies. Add multiple 1734-EP24DC modules to reach
the 63 module maximum).
Cat. No. PointBus Current Requirements
1734-IB2 75mA
1734-IB4 75mA
1734-IV2 75mA
1734-IV4 75mA
1734-OB2E 75mA
1734-OB2EP 75mA
1734-OB4E 75mA
1734-OV2E 75mA
1734-OV4E 75mA
1734-OW2 80mA
1734-OX2 100mA
1734-IE2C 75mA
1734-OE2C 75mA
1734-IE2V 75mA
1734-OE2V 75mA
1734-IA2 75mA
1734-IM2 75mA
1734-OA2 75mA
1734-IJ2 160mA
1734-IK2 160mA
1734-IR2 220mA
1734-IT2I 175mA
1734-SSI 110mA
1734-VHSC5 180mA
1734-VHSC24 180mA
1734-232ASC 75mA
1734-485ASC 75mA
Ethernet Communication
Rate
10/100Mbits/s, half or full-duplex
Module Location Starter module - left side of the 1734 system
Power Supply Specifications
Input Voltage Rating 24V dc nominal
10-28.8V dc range
Field Side Power
Requirements
24V dc (+20% = 28.8V dc maximum) @ 400mA
maximum
Inrush Current 6A maximum for 10ms
Interruption Output voltage will stay within specifications when input
drops out for 10ms at 10V with maximum load