User manual

Publication 1734-UM011A-EN-P - February 2004
B-4 Configure the RSLinx Ethernet Communication Driver
The new driver will appear in the list of configured drivers. (Your list will
display the drivers you have configured on your workstation.)
9. Close RSLinx
.
Configure the
AB_ETH/IP Driver
To configure the AB-ETHIP Ethernet communication driver perform the
following steps:
1. Start RSLinx.
2. From the Communications menu, select Configure Drivers.
3. Click on the arrow to the right of the Available Driver Types box. The
Available Driver Types list will appear.