User manual

131Publication ENET-UM001I-EN-P - January 2010 131
Chapter 9
Communicate with PanelView Terminals
Introduction
This chapter describes how a controller uses an EtherNet/IP communication
module to communicate with PanelView and PanelView Plus terminals over
an EtherNet/IP network.
Set Up the Hardware
In this example, the controller in the local chassis shares data with an HMI
application on the EtherNet/IP network. This application could be running a:
• PanelView terminal.
• PanelView Plus terminal.
• workstation running RSView 32 software.
• workstation running an RSView Enterprise application, such as RSView
Mach
ine Edition or RSView Supervisory Edition.
Ethernet Communication with Panelview
Topic Page
Set Up the Hardware 131
Connections to PanelView Terminals 132
Add a PanelView Terminal 133
Organize Controller Data for a PanelView Terminal 136
Connections to RSView Applications 136
AC
Data
B
Item Description
A Local chassis containing a Logix5000 controller and EtherNet/IP connection
B Switch
C HMI device with EtherNet/IP connectivity