User manual

142 Publication ENET-UM001I-EN-P - January 2010
Chapter 10 Monitor Diagnostics
Explicit Message
Connections
The Message Connections diagnostic web page presents a summary of
messages bridged through or initiated by the module.
Ethernet Interface Configuration
Obtain Network Configuration Whether the module is configured to obtain its network parameters (IP address) v
ia
BOOTP, DHCP, or from static configuration.
Ethernet Link
Autonegotiate Status Whether the Ethernet port is operating at 10 or 100 MBps.
Port Speed Whether the Ethernet port is operating at half duplex or full duplex.
Duplex Mode Whether the po
rt speed and duplex mode were determined via autonegotiation or manual
configuration.
Network Settings Web Page
This fiel
d Specifies
Message Connections Web Page
This field Specifies
Conn # The relative index of this connection (on the Message Connections page).
Connection ID The unique identifier for each connection.
Originator The IP address of the device that originated th
e connection on an Ethernet network.
T
arget The IP address of the device that is the target of the connection on an Ethernet network.
This may not be the ultimate target of the connection. For example, the target could be a
Logix
controller in a chassis.
Bridged Whether the connection bridges through the module.
State The current state of the connection:
· Ac
tive
· Closing
· Faulted
· Reserved