Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment • FAST SHIPPING AND DELIVERY • TENS OF THOUSANDS OF IN-STOCK ITEMS • EQUIPMENT DEMOS • HUNDREDS OF MANUFACTURERS SUPPORTED • LEASING/MONTHLY RENTALS • ITAR CERTIFIED SECURE ASSET SOLUTIONS SERVICE CENTER REPAIRS Experienced engineers and technicians on staff at our full-service, in-house repair center WE BUY USED EQUIPMENT Sell your excess, underutilized, and idle used equipment We also offer credit for buy-back
Installation Instructions SLC 5/01 and SLC 5/02 Modular Processors (Catalog Numbers 1747-L511, 1747-L514, and 1747-L524) http://literature.rockwellautomation.com/idc/groups/literature/documents/in/ 1747-in011_-mu-p.pdf FR Cette publication est disponible en français sous forme électronique (fichier PDF). Pour la télécharger, rendez-vous sur la page Internet indiquée ci-dessus. IT Questa pubblicazione è disponibile in Italiano in formato PDF. Per scaricarla collegarsi al sito Web indicato sopra.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.
Installation Instructions SLC 5/01 and SLC 5/02 Modular Processors (Catalog Numbers 1747-L511, 1747-L514, and 1747-L524) Inside . . .
4 SLC 5/01 and SLC 5/02 Modular Processors Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://www.literature.rockwellautomation.
SLC 5/01 and SLC 5/02 Modular Processors 5 Safety Considerations ATTENTION Never install, remove, or wire any module while power is applied. Also, do not expose processor modules to surfaces or other areas that may typically hold an electrostatic discharge. For general recommendations concerning installation safety requirements and safety related work practices, refer to the requirements specific to your region. • Europe: Reference the standards found in EN 60204 and your national regulations.
6 SLC 5/01 and SLC 5/02 Modular Processors Install The following sections provide information for installing: • the battery into the SLC 5/01 (1747-L511) • the processor in to the chassis Install the battery IMPORTANT If your processor has a battery, make sure it is connected before installing your processor into the chassis. This provides memory backup for your processor should the controller power supply fail. See page 12 for information regarding proper battery handling and storage. 1.
SLC 5/01 and SLC 5/02 Modular Processors 7 5. Close the processor door Install the Processor into the Chassis ATTENTION Never install, remove, or wire any module while power is applied. Also, do not expose processor modules to surfaces or other areas that may typically hold an electrostatic discharge. Electrostatic discharge can damage integrated circuits or semiconductors if you touch backplane connector pins.
8 SLC 5/01 and SLC 5/02 Modular Processors Apply Power to the Processor To apply power to the processor: 1. Energize the chassis power supply. 2. Check the chassis power supply and processor LEDs. The power LED on the power supply should be on and the fault LED on the processor should be flashing. Indicates the LED is OFF. POWER RUN COMM Indicates the LED is ON. CPU FAULT FORCED I/O Indicates the LED is FLASHING. BATTERY LOW Status of LED does not matter.
SLC 5/01 and SLC 5/02 Modular Processors 9 Troubleshoot the Processor Refer to the Troubleshooting chapter in the SLC 500 Modular Hardware Style User Manual, publication 1747-UM011. In addition refer to the SLC 500 Instruction Set Reference Manual, publication 1747-RM001. This manual contains explanations and examples for the entire instruction set as well as for all status words and bits. It also contains explanations for all possible fault codes found in status word S:6.
10 SLC 5/01 and SLC 5/02 Modular Processors Specifications General Specifications Specification SLC 5/01 (1747-L511, -L514) SLC 5/02 (1747-L524) Program memory 1K or 4K instructions 4K instructions Additional data storage 0 Maximum I/O capacity 3940 discrete inputs 3940 discrete outputs Max. local chassis/slots 3/30 Programming software RSLogix 500 Programming instructions 52 71 8 ms/K 4.8 ms/K 4 µs 2.
SLC 5/01 and SLC 5/02 Modular Processors 11 Environmental Specifications Specification Value Ambient temperature rating Operating: 0 °C...+ 60 °C (32 °F...140° F) Storage: 40 °C...85° C (-40 °F...
12 SLC 5/01 and SLC 5/02 Modular Processors Battery Handling, Storage, and Transportation (Cat. No. 1747-BA) Battery Handling ATTENTION Do not charge the batteries. An explosion could result or cells could overheat causing burns. Do not open, puncture, crush, or otherwise mutilate the batteries. An explosion may result and/or toxic, corrosive, and flammable liquids would be exposed.
SLC 5/01 and SLC 5/02 Modular Processors 13 IATA Restricted Articles Regulations of the International Air Transport Association, Geneva, Switzerland. IMPORTANT Regulations for transportation of lithium batteries are periodically revised. ATTENTION Do not incinerate or dispose of lithium batteries in general trash collection. Explosion or violent rupture is possible.
14 SLC 5/01 and SLC 5/02 Modular Processors Additional Resources For Refer to this document Pub. No. A more detailed description on how to install and use your modular SLC 500 system. SLC 500 Modular Hardware Style User Manual 1747-UM011 A reference manual that contains status file data, instruction set, and troubleshooting information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.
Rockwell Automation Support Rockwell Automation provides technical information on the web to assist you in using its products. At http://support.rockwellautomation.com, you can find technical manuals, a knowledge base of FAQs, technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best use of these tools.
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment • FAST SHIPPING AND DELIVERY • TENS OF THOUSANDS OF IN-STOCK ITEMS • EQUIPMENT DEMOS • HUNDREDS OF MANUFACTURERS SUPPORTED • LEASING/MONTHLY RENTALS • ITAR CERTIFIED SECURE ASSET SOLUTIONS SERVICE CENTER REPAIRS Experienced engineers and technicians on staff at our full-service, in-house repair center WE BUY USED EQUIPMENT Sell your excess, underutilized, and idle used equipment We also offer credit for buy-back