Specifications

6 SLC 5/01 and SLC 5/02 Modular Processors
Publication 1747-IN011B-EN-P - September 2007
Install
The following sections provide information for installing:
• the battery into the SLC 5/01 (1747-L511)
• the processor in to the chassis
Install the battery
1. Open the door of the processor.
2. Remove the jumper from the battery connector socket. Store the jumper in a
safe place for possible future use without the battery.
3. Insert a new or replacement battery in the holder making sure it is held in by
the retainer clips.
4. Plug the battery connector into the socket. See the figure below.
IMPORTANT
If your processor has a battery, make sure it is connected before
installing your processor into the chassis. This provides memory
backup for your processor should the controller power supply
fail.
See page 12
for information regarding proper battery handling and
storage.
+
White
Lead
Red
Lead
Battery
Connector
Retainer
Clips
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com