Specifications

7
Publication 17472.30 February 1996
Output Specifications
Description Specification
Type Relay MOSFET Triac
Voltage
5 to 264V ac
5 to 125V dc
20.4 to 26.4V dc 85 to 264V ac
Maximum Load Current
Refer to the Relay
Contact Rating Table.
1.0A per point @ 55° C (131° F)
1.5A per point @ 30° C (86° F)
0.5A per point
Minimum Load Current 10.0 mA 1 mA 10.0 mA
Current per Controller 1440 VA
3A for L16BBB
6A for L32BBB
1440 VA
Current per Common 8.0A
3A for L16BBB
6A for L32BBB
2.5A
Maximum Off State
Leakage Current
0 mA 1 mA
2 mA @ 132V ac
4.5 mA @ 264V ac
Off to On Response 10 ms max. 0.1 ms
8.8 ms @ 60 Hz
10.6 ms @ 50 Hz
On to Off Response 10 ms max. 1 ms 11.0 ms
Surge Current per Point Not Applicable
3A for 10 ms
➀
10A for 25 ms
➀
➀
Repeatability is once every 2 seconds at 55° C (131 ° F).
Relay Contact Rating Table
Maximum
Volts
Amperes
Amperes
Continuous
VoltAmperes
Volts
Make
Break
Continuous
Make Break
240V ac 7.5A 0.75A 2.5A 1800 VA 180 VA
120V ac 15A 1.5A
125V dc
0.22A
➀
1.0A 28 VA
24V dc
1.2A
➀
2.0A 28 VA
➀
For DC voltage applications, the make/break ampere rating for relay contacts can be determined by dividing
28 V A by the applied DC voltage. For example, 28 V A ÷ 48V dc = 0.58A. For DC voltage applications less
than 48V , the make/break ratings for relay contacts cannot exceed 2A. For DC voltage applications greater
than 48V , the make/break ratings for relay contacts cannot exceed 1A.
HandHeld Programmer Specifications
Description Specification: 1761HHPB30
Operating Power 83 mA @ 24V dc
Operating Temperature
0° C to 50° C (32° F to 122° F)
Storage Temperature
-20° C to 60° C (-4° F to 140° F)
Operating Humidity 5 to 95% noncondensing
Certification (when product or
packaging is marked)
•CSA certified
•
UL listed
•CE marked for all applicable directives
Display Type 2 x 16 LCD
Keypad 30 Rubber/carbon Based Keys