Specifications

ii
Publication 1747-10.4
Configuration Via BOOTP 3–7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using DOS/Windows BOOTP
3–8 . . . . . . . . . . . . . . . . . . . . . . . .
Install the DOS/Windows BOOTP server
3–9 . . . . . . . . . . . . . .
Edit
the DOS/Windows BOOTP Configuration File 3–9 . . . . . . .
Run
the Boot Server Utility 3–1 1. . . . . . . . . . . . . . . . . . . . . . . . . .
Running the DOS-Based Utility
3–1 1. . . . . . . . . . . . . . . . . . . . .
Running
the Windows-Based Utility 3–12 . . . . . . . . . . . . . . . . . .
Chapter 4
Ethernet Connections 4–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MSG
Instruction 4–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitation
for Manipulating the Control Block Bits 4–2 . . . . . . . . . .
Control Block Layouts
4–3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MSG
Instruction Control Block 4–4 . . . . . . . . . . . . . . . . . . . . . . .
Interpreting MSG Error Codes
4–6 . . . . . . . . . . . . . . . . . . . . . . . . . .
Interpreting
Ethernet Status Data 4–8 . . . . . . . . . . . . . . . . . . . . . . .
Using Subnet Masks and Gateways
4–10 . . . . . . . . . . . . . . . . . . . . .
Manually
Configuring Channel 1 for Processors on Subnets 4–1 1. .
Using
BOOTP to Configure Channel 1 for Processors on
Subnets 4–12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 5
Passthru Feature 5–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Address
Routing T able 5–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Status
File Bits 5–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MSG
Error Code 5–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Passthru Examples
5–3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Example
1: DF1-to-Ethernet and Ethernet-to-DF1 5–3 . . . . . . . . .
Example
2: DH485-to-Ethernet and Ethernet-to-DH485 5–1 1. . . . .
Appendix A
System T est General Specifications A–1. . . . . . . . . . . . . . . . . . . . . .
Processor
General Specifications A–2. . . . . . . . . . . . . . . . . . . . . . .
Appendix B
Communicating on the
Ethernet Network
Using RS232-to-Ethernet

Channel-to-Channel
Passthru
Specifications
(Optional) Return
Processor to Initial Factory
Conditions