Instruction Manual

h) ECHO

Can be used in a similar way to the above control, except

that it is wired post-fader and the feed to an external

effects device will reduce as the channel fader is lowered.

Use in conjunction with the echo master (see OUTPUT SECTION)

to set correct operating level.

PAN

Use to position the signal anywhere between left and right

in the stereo mix.

PFL is an abbreviation for Pre-Fader-Listen.

When selected

it enables an operator to check the level of a signal

present in the input before the channel fader.

The

pre-

fade signal level is governed by settings of the gain control

h;i,;;i

equalisation controls (d, e, and f). See OPERATION

k) PEAK

The LED (Light Emitting Diode) peak indicator flashes a

warning when the signal level is too high and approaching

the onset of clipping distortion.

1) FADER

Four fader settings are marked for each input channel,

these are:

'+10',

indicating the extra

10dB

boost available

on the fader;

'O',

(normal operating position) indicating

unity gain between input channel and output section;

'-10';

and

'infinity'

or channel off.