Operation Manual

GLD User Guide 19 AP8561 iss.2
Template Show settings
There are three Template Shows available. These have the following settings:
 SoftKey assignments are Scene Safe
 SoftKeys 1-8 = DCA mute 1-8
 SoftKey 9 = PAFL Clear All
 SoftKey 10 = FX4 tap tempo (FOH only)
 Scene Confirmation = On
 Global Direct Out = post-delay, pre-fade, post-mute
 Monitor Port = ME-1 mode
 I/O Port out = input socket 1-48
 PEQ = 20-20kHz, Curve Fill = On
 Auxes are post-PEQ, pre-fade (monitors)
 FX are post-fade (effects)
 USB playback assigned to CH47/48
 USB recording from LR via stereo Matrix1
The Template Show ‘Board Reset’ Scene Each Template Show provides a Scene called
'Board Reset'. This resets the GLD settings to the starting point default for the loaded Template Show.
The Board Reset Scene is available in position 1 and duplicated in position 500 for backup.
Use this Scene to instantly reset parameters without affecting the mix configuration, user preferences or
the other Scenes. You can edit its Recall Filter to protect parameters you do not wish to reset. For
example, you could set the filter to protect the patchbay and master strip assignments in a festival
situation.
Note You can also set Scene Safes to protect selected parameters for all Scenes, for example to remove
the SoftKeys from Scene recall.
When creating your own User Show from a Template Show you can choose to overwrite the Scene 1
contents with your preferred settings, rename it, write in a description, set its Recall Filter to reset selected
parameters, or simply delete it. You can still access the default Board Reset using Scene 500 if needed.
Template1 LR
This Template configures a traditional
architecture and layout with stereo LR
main mix for mixing FOH and Monitors
from FOH:
LR stereo main mix
4 Groups (2 stereo)
8 Auxes (6 mono, 1 stereo)
8 FX (4 assigned to strips)
6 Matrix (2 mono, 2 stereo)
16 DCA / Mute groups
Talkback using mic socket 44
USB playback to CH47/48
Recording from stereo Matrix 1
1
9
17
L
A1
A5
R
A2
A6
A3
A1
A4
A1
2
10
18
3
11
19
4
12
20
5
13
21
6
14
22
7
15
23
8
16
24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40
G1 G1
LRG2 G2
M1 M1 M2 M2
41 42 43
Talkback
L
RM2 LR
45/6
M1
M1
ss
LRss
LRss LRss
L
ss
LR
R
GLD-80
AR84
AR84
AR2412
dSNAKE EXPANDER I/O Port
In = not patched
Out = IP Skt 1-48
2 3 4 9 10 11 12
14 15 16 21 22 23 24
5678
17 18 19 20
1234 56 LR
1234 561
1234 1234
M2
S
DCA
Aux
FX return FX send
LR 1212
Grp Mtx
SS
1
13
26 27 28 33 34 35 3629 30 31 3225
38 39 40 45/6USB41 42 4337
Alt View
Fader Bank 1 Fader Bank 2
Custom Rotary 2
Custom Rotary 1
not assigned
not assigned
Channel number
1
2
3
4
5
PAFL Clear
Tap tempo
DCA mute
A
B
C
D
A
B
C
D
all Pre-fade
4= Delay
for digital mic split
Direct Out = Post-Delay, Pre-fade, Post-Mute
Talkback from Input 44 and assigned to all Aux sends
M1
M1
LRss
LR
12
6
7
8
USB Playback assigned to Channel 47/48
USB Recording from LR via stereo Mtx 1
DIGITAL
USB
Playback Record
M1
s
Rec
Rec
SS
Default = Pan
Monitor Out = ME-1 mode
PEQ = 20-20kHz, Curve Fill = On
Scene Edit Confirmation = On
SoftKeys are Scene Safe