User guide

8 WZ14:4:2 U
SER
G
UIDE
R
EAR
P
ANEL
L
AYOUT
S
PECIFICATIONS
0 dBu = 0.775 Volts rms 0 dBV = 1 Volt rms
HEADROOM
: .............................................+21dB channels
.............................................................+23dB mix to output
MAX OUTPUT
: Balanced .......+25dBu 2kohm max load
Unbalanced ...+21dBu 2kohm max load
METERS
: L, R................peak reading 12 bar LED
PEAK LEDs
: ............................Turn on 5dB before clipping
FREQUENCY RESPONSE
:.............20Hz to 50kHz +0/-1dB
DISTORTION
: THD+Noise at +14dBu 1kHz
Channel to mix output.............................................. 0.006%
WEIGHT
: unpacked 11kg, packed 14kg
CROSSTALK:
Referred to driven channel at 1kHz
Channel fader off......................................................<-90dB
Channel off............................................................... <-90dB
NOISE
: Measured rms 22Hz to 22kHz bandwidth
Mic input EIN (150 ohm source) ............................. <-128dB
LR output residual noise......................<-97dBu (101dBS/N)
LR faders unity mix noise ...................<-87dBu (-91dB S/N)
POWER SUPPLY
: internal, linear regulated
AC Mains input:..................... IEC socket with lead supplied
.................................................100 to 240V AC @ 50/60Hz
............................................factory wired to country voltage
Power consumption:............................................. 35W max
Mains Fuse rating:................. 100-120V AC T630mA 20mm
.............................................. 220-240V AC T315mA 20mm
C
ONNECTIONS
INPUTS:
Channel 1-10 in ........... XLR ............................. pin 2 hot, 3 cold, bal................. PAD out........... 2k ohm variable -60 to -20dBu
.................................... TRS jack...................... tip hot, ring cold, bal................. PAD in............. >10k ohm variable -30 to +10dBu
Stereo 11/12-13/14 in .. TRS jack (L/M,R)......... tip sig, ring gnd, unbal.............. >10k ohm ........ -20 to +10dBu
.................................... RCA PHONO............... unbalanced .............................. >10k ohm ........-20 to +10dBu
Stereo return................ TRS jack...................... tip sig, ring gnd, unbalanced .... >10k ohm ........-10dBV minimum
2-Track return.............. RCA PHONO............... unbalanced .............................. >10k ohm ........ variable -10dBV minimum
Talkback mic in............ XLR ............................. pin 2 hot, 1 cold, unbalanced ... 2k ohm ............variable -40 to -15dBu
INSERTS:
Channel 1-10 Insert ..... TRS jack...................... tip send, ring return, unbal........ <75 ohm, >3k ohm 0dBu
L-R mix/groups ............ TRS jack...................... tip send, ring return, unbal........ <75 ohm, >7k ohm -2dBu
OUTPUTS:
L,R/Groups out ............ XLR ............................. pin 2 hot, 3 cold, balanced ....................<75 ohm......... +4dBu
Mono out...................... XLR ............................. pin 2 hot, 3 cold, balanced ....................<75 ohm......... +4dBu
Aux 1-6 out ................. TRS jack...................... tip hot, ring cold, balanced ....................<75 ohm......... +4dBu
2-Track send................ RCA PHONO............... unbalanced ...........................................<75 ohm......... variable -10dBV minimum
Phones out .................. TRS jack...................... tip left, ring right ....................................for stereo headphones 30 to 600 ohms
Channel direct out........ TRS jack...................... tip hot, ring cold, impedance balanced ..<75 ohm.......... 0dBu
+48V
MIC 9
- IN
+IN
SERI AL No:
LL
Made in the UK by ALLEN & HEATH
4
R
3
R
MONO
L /
MONO
L /
STEREO
2
R
1
RETURNS
R
MONO
L /
MONO
L /
M
OUT
RR
RETURN
2-TRACK
SEND
LL
R
L /
R
AUX 2
INPUT
B
A DI VISI ON OF HARMAN INTERNATIONAL INDUSTRIES Lt d.
AUX 6
R
OUTPUT
AUX 5
L
AUX 3
SYS- LINK
OPTI ON
AUX 4
G4 G3 G2
INSERT
4R
OUT
A6
OUT
A4
INSERT
OUT
A5
OUT
A3
2
OUT
A2
INSERT
OUT
A1
IN
XLR OUT
LINE
IN/OUT
SEND
RETURN
IMPEDANCE BALANCED
0L[:L]DUG
AUX 1
G1
BAL ANCED
AUX
SENDS
RINGRING
47=7=5
:=
INSERT
TIPTIP
+OUT
TIP +
RINGRING -
- OUT
TIP
1
3
2
3
INPUT
2
1
OUT
R
GRP/ AUX
REVERSE
R
L /
B
M
IN
M
+48V
MIC 10
10
DIR
9
DIR
OUT
10
IN
9
IN
A
OUT PU T S
INSERTINSERT
L3
INSERT
1
IN
A
STEREO INPUTS
13-14
IN
11-12
INSERT
10
INSERT
9
INSERT
NO US ER SERVI CEAB LE PARTS INSI DE.
SUPPLY VOLTAGE RANGE:
100 - 240V
REFER SERVICI NG TO QUALIFI ED SERVICE PERSONNEL .
47-63Hz ~ 30W MAX
WARNING - THI S APPARATUS MUST BE EARTHED.
REFER TO USER GUI DE BEFORE CONNECTI NG SUPPLY
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THI S APPARATUS TO RAI N OR M OI STURE.
AVIS: RISQUE DE CHOC ELECTRI QUE - NE PAS OUVRIR.
REPLACE FUSE WITH SAME TYPE AND RATING
WARNING: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE
ATTENTI ON: REMPLACER LE FUSI BLE AVEC UN DES M EM ES CARACTERISTI QUES.
100 - 240V~ T500mA 250V 20mm
TIPTIP + IN
RINGRING - IN
CAUTION
+48V
MIC 7MIC 8
+48V
8
DIR
OUT
7
OUT
DIR
8
IN
7
IN
6
DIR
OUT
5
+48V
MIC 6
DIR
OUT
6
IN
5
IN
FUSE
OFF
AC MAINS IN ~
4
+48V
MIC 5
DIR
OUT
3
+48V
MIC 4
DIR
OUT
4
IN
3
IN
2
+48V
MIC 3
DIR
OUT
1
+48V
MIC 2
DIR
OUT
2
IN
1
IN
INSERT
8
INSERT
7
MIC/ LINE INPUTS
INSERT
6
INSERT
53
INSERTINSERT
4
INSERT
2
ON
~
PHANTOM POWER
+48V
MIC 1
1
M3x12MM