User guide

Allen & Heath 13 XONE:S2 User
FILTER SECTION
1
2
3
4
5
1
Filter Assign Selector
Selects the channel to be routed through the filter. The
FILTER LED in the selected channel section will light
when selected. The EXTERNAL LED will light when the
selector is set to EXTERNAL.
NOTE: To prevent accidental assignment of the filter
there is a delay when selecting an individual channel. For
smoothest operation, use the filter on/off button before
selecting another channel rather than relying on the
switching delay.
2
Resonance Control
This produces the classic analogue VCF sound by feeding
some of the filter output back to its input. The control
ranges from ‘mild’ producing a very subtle effect, to
‘wild’ producing a dramatic phase effect with feedback
just short of oscillation.
3
HPF Button
Turns on the high pass (bass cut) filter slope. The light
ring around the button illuminates when selected.
4
BPF Button
Turns on the band pass (bell shaped) filter slope. The
light ring around the button illuminates when selected.
5
LPF Button
Turns on the low pass (treble cut) filter slope. The light
ring around the button illuminates when selected.