Use and Care Guide

ManualsBrandsallen + roth ManualsCeiling Fans00882

119

w elcoming • sophisticated • inspiring

Serial NumberNúmero de serie Purchase Date

Fecha de compra

Questions, problems, missing parts? Before returning to your retailer, call our customer service

department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.

Preguntas, problemas, piezas faltantes?Antes de regresar al vendedor, llame a nuestro

departamento de servicio al ciente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m. (hora del

este) y viernes de 8 a.m. a 5 p.m. (hora del este).

ATTACH YOUR RECEIPT HEREADJUNTE SU RECIBO AQUÍ

ITEM #0357652ARTÍCULO #0357652

MODEL #00882

MODELO #00882

UL MODEL #LRN32

MODELO UL #LRN32

Español p. 19

LARALYN CEILING FANVENTILADOR DE TECHO

LARALYN

EB 14200

Lowes.com/allenandrothLowes.com/allenandroth

allen + roth

is a registered trademark

allen + roth

es una marca registrada de

Summary of content (10 pages)

PAGE 1
welcoming allen + roth® es una marca registrada de LF, LLC. Todos los derechos reservados. • sophisticated • inspiring ARTÍCULO #0357652 VENTILADOR DE TECHO LARALYN welcoming • sophisticated MODELO UL #LRN32 Número de serie LARALYN CEILING FAN MODEL #00882 UL MODEL #LRN32 Preguntas, problemas, piezas faltantes?Antes de regresar al vendedor, llame a nuestro departamento de servicio al ciente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m. (hora del este) y viernes de 8 a.m. a 5 p.m.
PAGE 2
TABLE OF CONTENTS Safety Information.................................................................................................................... 3 Package Contents.................................................................................................................... 4 Hardware Contents...................................................................................................................5 Preparation ............................................................................
PAGE 3
PACKAGE CONTENTS HARDWARE CONTENTS (shown actual size) AA A D C B K H EE L PART A B C D E F G H I J K L M N O M N O DESCRIPTION Mounting Bracket (preassembled to Canopy (B)) Canopy Canopy Cover (preassembled to Canopy (B)) Yoke Cover Downrod Blade Bracket Blade Motor Housing Assembly Switch Housing Light Kit (preassembled to Switch Housing (I)) Glass Bowl Bulb Bowl Cap (preassembled to Light Kit (J)) Finial (preassembled to Light Kit (J)) Mounting Screw (preassembled to Motor Housing Assembly (
PAGE 4
INITIAL INSTALLATION INITIAL INSTALLATION 1. Determine mounting method to use: A-Downrod Mount (standard or angled ceiling) B-Closemount (standard ceiling only) 4. Install the mounting bracket (A) to the outlet box (not included), sliding the mounting bracket (A) over the two outlet box screws (not included). Securely tighten the two outlet box screws. 1 Important: If using the angle mount, check to make sure the ceiling angle is not steeper than 20°.
PAGE 5
DOWNROD-STYLE FAN MOUNTING CLOSEMOUNT-STYLE FAN MOUNTING 3. Loosen preassembled set screws from the yoke on motor housing assembly (H). Slip downrod (E) into yoke, aligning holes on both parts. Insert previously removed pin through holes on yoke and downrod (E), then insert previously removed clip into the pin until it snaps into place. 1. Remove the canopy cover (C) from the bottom of the canopy (B). 3 1 E B Clip Pin H Set screw C 2.
PAGE 6
CLOSEMOUNT-STYLE FAN MOUNTING WIRING 4. Align mounting holes on canopy (B) with holes on motor housing assembly (H) and fasten using three previously removed screws. Securely tighten screws. 4 B H JJ 2. Tape the wire connectors (AA) and wires together. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and the ungrounded conductor on the other side of the outlet box.
PAGE 7
FINAL INSTALLATION FINAL INSTALLATION 3. Install the non-slotted screws previously removed (Step 3, page 6) to canopy (B) and tighten securely. 3 Outlet box 6. Remove the preassembled screws from the switch housing cover on motor housing assembly (H). Screw 6 H If using fan WITH the light kit, continue to Step 7, If using fan WITHOUT the light kit, proceed to Step 14. 4. Attach a blade (G) to a blade bracket (F) using the blade screws (EE). Tighten each blade screw (EE) securely.
PAGE 8
FINAL INSTALLATION FINAL INSTALLATION 9. Install bulbs (L) into sockets. Note: This fan has an energy-saving wattage limiter included. If you replace the candelabra-base bulbs with over 190 watts, the light will automatically turn off. Please ensure the bulb wattage is always below 190 watts. 12. Place previously removed rubber washer and hex nut (Step 10, page 14) onto the pipe and securely tighten. Pass fan pull chain through side hole on bowl cap (M), 9 12 securely tighten.
PAGE 9
OPERATION INSTRUCTIONS 1. PULL CHAIN: (1). The fan pull chain is for motor speed control: High, Medium, Low and Off. Pull the chain once for each position. FINAL INSTALLATION 15. Insert the plastic plug (DD) into the center hole in the switch housing (I). 15 2. REVERSE SWITCH: When the season changes, you may want to change the direction the fan spins. To switch I Hardware Used DD Plastic Plug NOTE: Wait for fan to stop before reversing switch. which cools the air.
PAGE 10
WARRANTY The manufacturer warrants this fan to be free from defects in workmanship and material present at time of shipment from the factory for lifetime limited from the date of purchase. This warranty applies only to the original purchaser. The manufacturer agrees to correct such defect at no charge or at our option replace the ceiling fan with a comparable or superior model. To obtain warranty service, present a copy of your sales receipt as proof of purchase.