Installation Guide

INSTALLATION INSTRUCTIONS

PREPARATION

Estimated Assembly Time: 20 minutes (24 hours for silicone caulk to dry).

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install

this product.

WARNING

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Before beginning assembly of product, make sure all parts are present. Compare parts with

package contents list and hardware contents list. If any part is missing or damaged, do not

attempt to assemble the product.

Tools Required for Assembly (not included): Phillips screwdriver, utility knife or scissors,

power drill with drill bit

Helpful Tools (not included): Measuring tape, level

1. Locate Wall Bracket (B) and set aside.

Locate and mark wall stud locations where

Cabinet (A) will be placed. Center Wall

Bracket (B) in desired level location off the

floor and mark locations where Wall Bracket

(B) meets the location of the wall studs.

CAUTION

• Some steps are more easily handled with two adults.

• Before installation, carefully use scissors or utility knife to cut and unwrap all parts. Make sure

you DO NOT discard the hardware.

• Use care when installing your new wall cabinet; take your time and follow the installation

instructions closely.