welcoming • sophisticated allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. • inspiring ITEM #0982656 1-HEAD LED FLUSHMOUNT MODEL #16100 Français p. 9 Español p. 17 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.
PACKAGE CONTENTS B A C PART A B C DESCRIPTION Canopy Mounting Bracket LED Assembly 2 QUANTITY 1 1 1
HARDWARE CONTENTS AA BB Wire Connector Qty: 3 Long Machine Screw Qty: 2 CC Canopy Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
ASSEMBLY INSTRUCTIONS 1. Orient the mounting bracket (B) so that the arms are facing away from the outlet box (not included). Connect the mounting bracket (B) to the outlet box with Long machine screws (BB). 1 Outlet Box Hardware Used BB Long Machine Screw x2 BB Arm 2. Wire connection guide: Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw.
ASSEMBLY INSTRUCTIONS 3. Pass Canopy (A) over the side arms protruding from the mounting bracket (B) and secure in place with canopy screws (CC). Hardware Used Canopy CC Screw 3 5 B x2 A CC LOOSEN SCREWS TO SWIVEL HEAD TO DESIRED POSITION CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish.
WARRANTY The Distributor warrants that its products will be free from defects in material and workmanship for three (3) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Distributor the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday. PART B AA BB CC DESCRIPTION Mounting Bracket Wire Connector Long Machine Screw Canopy Screw B PART # XBAR09 WC001 SCR832X150 CS16100-SN AA BB CC Printed in China allen + roth is a registered trademark of LF, LLC. All rights reserved. ® Rev.
welcoming • sophisticated allen + roth ® est une marque de commerce déposée de LF, LLC. Tous droits réservés. • inspiring ARTICLE #0982656 PLAFONNIER À 1 LUMIÈRE MODÈLE #16100 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.
CONTENU DE L’EMBALLAGE B A C PIÈCE A B C DESCRIPTION Couvercle Support de fixation Ensemble de DEL 9 QUANTITÉ 1 1 1
QUINCAILLERIE INCLUSE AA BB Capuchon de connexion Qté : 3 Vis à métaux courte CC Vis du couvercle Qté : 2 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. • • • • • • AVERTISSEMENT IMPORTANT : Coupez l’électricité avant TOUTE manipulation. Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure.
INSTRUCTIONS POUR L’ASSEMBLAGE 1. Placez le support de fixation (B) de façon à ce que les bras soient orientés à l’opposé de la boîte de sortie (non incluse). Fixez le support de fixation (B) à la boîte de sortie à l’aide des vis à métaux longues (BB). 1 Boîte de sortie Quincaillerie utilisée Vis à métaux longue BB x2 BB B Bras 2.
INSTRUCTIONS POUR L’ASSEMBLAGE 3. Placez le couvercle (A) sur les bras latéraux qui dépassent du support de fixation (B) et fixez-le à l’aide des vis de couvercle (CC). 3 5 B Quincaillerie utilisée Vis du CC couvercle x2 A CC Desserrer les vis de la tête pivotante à la position désirée ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif.
GARANTIE Le distributeur garantit ses articles contre les défauts de matériaux et de fabrication pour une période de un (3) an à compter de la date d’achat par l’acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, communiquez avec notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi. PIÈCE B AA BB CC DESCRIPTION Support de fixation Capuchon de connexion Vis à métaux longue Vis du couvercle B Nº DE PIÈCE XBAR09 WC001 SCR832X150 CS16100-SN AA BB CC Imprimé en Chine allen + roth est une marque de commerce déposée de LF, LLC. Tous droits réservés. Rev.
welcoming • sophisticated allen + roth ® es una marca registrada de LF, LLC. Todos los derechos reservados. • inspiring ARTÍCULO #0982656 MONTAJE AL RAS CON 1 LUZ MODELO #16100 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.
CONTENIDO DEL PAQUETE B A C PIEZA A B C DESCRIPCIÓN Base Abrazadera de montaje Ensamblaje del LED 16 CANTIDAD 1 1 1
ADITAMENTOS AA Conector de cable Cant.: 3 BB CC Tornillo de la base Cant.: 2 Tornillos para metales largo Cant.: 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente realizar trabajo alguno sin desconectar la electricidad. Vaya a la caja principal de fusibles o interruptor de circuitos de su casa.
INSTRUCCIONES DE ENSAMBLAJE 1. Oriente el soporte de montaje (B) de modo tal que los brazos miren hacia el lado opuesto de la caja de salida (no se incluye). Conecte el soporte de montaje (B) a la caja de salida con los tornillos para metales largos (BB). 1 Caja de salida Aditamentos utilizados Tornillos para metales largo BB x2 BB Brazo 2.
INSTRUCCIONES DE ENSAMBLAJE 3. Pase la base (A) sobre los brazos laterales que sobresalen del soporte de montaje (B) y fíjela en su lugar con los tonillos de la base (CC). 3 5 B Aditamentos utilizados Tornillo de CC la base x2 A CC AFLOJE LOS TORNILLOS PARA GIRAR LA CABEZA A LA POSICIÓN DESEADA MANTENIMIENTO Y CUIDADO • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif.
GARANTÍA El distribuidor garantiza que sus productos no presentará defectos de fabricación en el material o la mano de obra durante un período de un (3) año desde la fecha de su compra original.
LISTA DE PIEZAS DE REPUESTO Para obtener piezas de repuesto, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves, de 8 a.m. a 6 p.m. hora estándar del Este y los viernes de 8 a.m. a 5 p.m., hora estándar del Este. PIEZA B AA BB CC DESCRIPCIÓN Abrazadera de montaje Conector de cable Tornillos para metales largo Tornillo de la base B PIEZA # XBAR09 WC001 SCR832X150 CS16100-SN AA BB CC Impreso en China allen + roth es una marca registrada de LF, LLC.