Installation Guide

6
Vertical mounting: 22 5/6”(580mm)
Horizontal mounting: 28 4/5” (732mm)
2
INSTALLATION INSTRUCTIONS
1
A
B
B
B
B
1. Measure the distance between the holes in
the mounting hangers (B) on the back of the
mirror (A).
Note: The distance between the holes in
the mounting hangers (B) on the back of the
mirror (A) is 22 5/6” (580mm) if installing the
mirror vertically.
Note: The distance between the holes in
the mounting hangers (B) on the back of the
mirror (A) is 28 4/5” (732mm) if installing the
mirror horizontally.
2. Measure and mark location for mounting
hardware on the wall using the measurement
from Step 1. Make sure the marks are level
and located at the desired height.