Installation Guide

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with

package contents list and hardware contents list. If any part is missing or damaged, do not attempt

to assemble the product.

Estimated Assembly Time: 30~60 minutes

Tools Required for Assembly (not included): Ladder, Phillips Head Screwdriver, Flathead

Screwdriver, Wire Cutters, Pliers, Safety Glasses

Helpful Tools (not included): Wire Stripper, Tape

ASSEMBLY INSTRUCTIONS

1. Unscrew canopy nuts (C) from fixture assembly (B)

and detach mounting plate (A).

2. Install the mounting plate (A) to a junction box (not

included) with junction box screws (AA).

4. Make electrical connections using the wire connectors

(BB). Refer to ELECTRICAL CONNECTIONS in the

Safety Information section of page 3.

x 3

Wire Connector

Hardware Used

x 2

Hardware Used

Junction

Box Screws

Wrench

x 1

3. Remove the preassembled socket ring (E) from

the fixture assembly (B). Attach the shade (D) over

the socket on the fixture assembly (B), and then

secure by the socket ring (E) using the wrench (CC).

Hardware Used