Installation Guide

ASSEMBLY INSTRUCTIONS (CONT’D)

17. Install the doors

I. Loosen the screws on the hinge arms and plates pre-attached on the walls (F and G).

II. Pick up left front door (Q) and attach it to left wall (F) by engaging both door hinges

simultaneously. Please follow the steps below to combine the door hinges together.

i. Extend both hinge arms on the left front door (Q) to open position.

ii. Insert the “J” hooks beneath the hinge arms into the lugs on mounting plates pre-attached

on left wall (F).

iii. Press lightly on the end of both hinge arms to engage the catch.

iv. To remove the hinge arms from the mounting plates, press gently in the release lever on the

back of hinge arms.

III. Once assembled, go back and fully tighten all screws.

IV. Repeat the same procedure to attach the other right front door (R) at the opposite side.

V. Open and close the doors to make sure they are aligned and shut correctly. If necessary,

adjust the screws for a good ﬁt.

Release lever

I/F

(i)

“J” hook

(ii)

(iii)

III

18. If you need to adjust the doors, do so in the following manner.

To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.

To adjust door left or right, turn screws (b) on both hinges, in or out.

To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.