Installation Guide

7
PREPARATION
Before beginning assembly of product, make
sure all parts are present. Compare parts with
package contents list and hardware contents list.
If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Assembly Time: 50 minutes
Tools Required for Assembly (not included):
Phillips screwdriver
ASSEMBLY INSTRUCTIONS
1. Set center front panel (E) down on a
non-scratch surface. Insert six wooden
dowels (AA) into holes on left and right sides of
center front panel (E). Align the holes on center
front panel (E) with the corresponding holes
on left front panel (O) and right front panel (P),
securing with two short screws (BB).
Hardware Used
AA
Wooden Dowel
x 6
BB
Short Screw
x 2
1
1
2
P
E
AA
BB
O
2. Screw six connecting rods (DD) into the
designated plastic bushings on the back of the
left front panel (O) and right front panel (P).
Fully tighten with a Phillips screwdriver.
Hardware Used
DD
Connecting Rod
x 6
2
DD
P
E
O
DD