Installation Guide

4
Lowes.com/allenandroth
ASSEMBLY INSTRUCTIONS
2
DD
Outlet Box
B
BB
D
C
EE
A
1
1. Before beginning the assembly process,
temporarily hold canopy (A) up to the ceiling
at the desired installation site. If you wish to
adjust the length of cord (C), loosen set screw
(D) with a small screwdriver (EE) and push or
pull as needed to either lengthen or shorten
cord (C). Once desired length is achieved,
re-tighten set screw (D) and set fixture aside.
Short Machine
Screw
Long Machine
Screw
x 2
x 2
BB
DD
Hardware Used
2. Orient the mounting bracket (B) so the raised
center portion protrudes into the outlet box (not
included). Insert long machine screws (DD)
through mounting bracket (B) so the long
machine screws (DD) protrude outward.
Connect the mounting bracket (B) to the outlet
box with short machine screws (BB).
x 1
EE
Screwdriver
Hardware Used