Installation Guide

ASSEMBLY INSTRUCTIONS

CARE AND MAINTENANCE

TROUBLESHOOTING

• Always be certain that electric current is turned off before cleaning this item.

• Use a soft, moist cloth with mild, non-abrasive soap to clean fixture. Never use glass cleaner on

fixture, as it will damage the metal finish.

• All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not

wash shades in an automatic dishwasher.

• Bulb replacement: Use two (2) 13-watt max, 2700 K. GU24-base bulbs.

Fixture does not light. 1. Fixture may be wired incorrectly. 1. Check wiring.

2. Worn or broken bulb. 2. Replace bulb.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

If you have any questions regarding the product, please call customer service at 1-866-439-9800,

8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.

8. Screw threaded pipe (H) into the hex coupling (F) on

the mounting pan (A). (See Fig. 8.)

Note: The pipe should be positioned so that the end with

the least amount of threads is screwed into the

coupling.

9. Place metal washer (GG), nylon washer (HH),

diffuser (D), and second nylon washer (HH) onto

threaded pipe (H) and secure with finial (E). (See

Fig. 9.)

Hardware Used

Metal

Washer

Nylon

Washer

x 2

x 1