welcoming allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. • sophisticated • inspiring ITEM #0760190 SEMI-FLUSHMOUNT CEILING FIXTURE MODEL #B10039 Français p. 10 Español p. 19 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday. EB15504 1 Lowes.
PACKAGE CONTENTS B A C J K E I H G D F L PART A B C D E F G H I J K L M M DESCRIPTION Canopy Mounting Bracket Pipe Hex Nut (preassembled to Threaded Nipple (H)) Socket Assembly Metal Washer (preassembled to Threaded Nipple (H)) Nylon Washer (preassembled to Threaded Nipple (H)) Threaded Nipple Coupling (preassembled to Socket Assembly (E)) Decorative Ring Glass Shade Decorative Cap Finial 2 Lowes.
HARDWARE CONTENTS (shown actual size) AA BB Wire Connector Short Qty: 3 Machine Screw Qty: 2 CC EE DD Lock Washer Qty: 2 Threaded Knob Qty: 2 Long Machine Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity.
ASSEMBLY INSTRUCTIONS 1. Insert long machine screws (DD) through mounting bracket (B) so the long machine screws (DD) protrude outward. Orient the mounting bracket (B) so the raised center portion protrudes into the outlet box (not included). Connect the mounting bracket (B) to the outlet box with short machine screws (BB). 1 Outlet Box Hardware Used Short Machine BB Screw x2 Long Machine Screw x2 DD 2. Screw pipe (C) onto the canopy (A). Screw socket assembly (E) onto the pipe (C).
ASSEMBLY INSTRUCTIONS 3. Wire connection guide: Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw preassembed on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 5. Insert bulbs (not included). Use 60-watt max. candelabra-base incandescent bulbs or a halogen/LED/CFL equivalent. 5 E 6. Remove metal washer (F), nylon washer (G) and hex nut (D) from threaded nipple (H). Then screw threaded nipple (H) onto coupling (I). 6a G D F H 6b H 7. Lower decorative ring (J) onto the glass shade (K). 7 6 J K 6 Lowes.
ASSEMBLY INSTRUCTIONS 8. Raise the glass shade (K), nylon washer (G), and metal washer (F) over the threaded nipple (H) and secure with hex nut (D). 8 6 K H G D F 9. Pass the decorative cap (L) over the threaded nipple (H) and secure with finial (M). 9 6 H L M CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture.
WARRANTY The Distributor warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Distributor the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.
welcoming • allen + roth ® est une marque de commerce déposée de LF, LLC. Tous droits réservés. sophisticated • inspiring ARTICLE #0760190 PLAFONNIER SEMI-ENCASTRÉ MODÈLE #B10039 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi. Lowes.
CONTENU DE L’EMBALLAGE B A C J K E I H G D F L PIÈCE A B C D E F G H I J K L M M DESCRIPTION Couvercle Support de fixation Tige Écrou hexagonal (préassemblé à la tige filetée [H]) Ensemble de douille Rondelle en métal (préassemblée à la tige filetée [H]) Rondelle en nylon (préassemblée à la tige filetée [H]) Tige filetée Raccord (préassemblé à l’ensemble de douille [E]) Anneau décoratif Abat-jour en verre Capuchon décoratif Embout 11 Lowes.
QUINCAILLERIE INCLUSE (grandeur réelle) AA BB Capuchon de connexion Vis à Qté : 3 métaux courte Qté : 2 CC EE DD Rondelle Qté : 2 Bouton fileté Qté : 2 Vis à métaux longue Qté : 2 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Coupez l’électricité avant TOUTE manipulation.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Insérez les vis à métaux longues (DD) à travers le support de fixation (B) de façon à ce qu’elles dépassent de la boîte de sortie. Placez le support de fixation (B) de façon à ce que la partie centrale surélevée sorte du côté de la boîte de sortie (non incluse). Fixez le support de fixation (B) à la boîte de sortie à l’aide des vis à métaux courtes (BB). Quincaillerie utilisée 1 Boîte de sortie BB Vis à métaux BB courte x2 Vis à métaux DD longue x2 B DD 2.
INSTRUCTIONS POUR L'ASSEMBLAGE 3. Guide pour la connexion des fils Fil de mise à la terre : • Installation aux États-Unis : enroulez le fil de mise à la terre de la boîte de sortie autour de la vis de mise à la terre préassemblée au support de fixation (B), à au moins 5,08 cm de l’extrémité du fil. Serrez la vis de mise à la terre. Si le luminaire est muni d’un fil de mise à la terre, raccordez-le au fil de mise à la terre de la boîte de sortie à l’aide d’un capuchon de connexion (AA).
INSTRUCTIONS POUR L'ASSEMBLAGE 5. Vissez les ampoules (non incluses). Utilisez des ampoules à incandescence à petit culot d’un maximum de 60 W ou des ampoules fluocompactes, à DEL ou halogènes équivalentes. 5 E 6. Retirez la rondelle en métal (F), la rondelle en nylon (G) et l’écrou hexagonal (D) de la tige filetée (H). Vissez ensuite la tige filetée (H) au raccord (I). 6a G D F H 6b H 7. Glissez l’anneau décoratif (J) sur l’abat-jour en verre (K). 7 6 J K 15 Lowes.
INSTRUCTIONS POUR L'ASSEMBLAGE 8. Placez l’abat-jour en verre (K), la rondelle en nylon (G) et la rondelle en métal (F) sur la tige filetée (H) et fixez le tout à l’aide de l’écrou hexagonal (D). 8 6 K H G D F 9. Placez le capuchon décoratif (L) sur la tige filetée (H) et fixez-le à l’aide de l’embout (M). 9 6 H L M ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif.
GARANTIE Le distributeur garantit ses articles contre les défauts de matériaux et de fabrication pour une période de un (1) an à compter de la date d’achat par l’acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, communiquez avec notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.
welcoming • sophisticated allen + roth ® es una marca registrada de LF, LLC. Todos los derechos reservados. • inspiring ARTÍCULO #0760190 LÁMPARA DE TECHO DE MONTAJE SEMI AL RAS MODELO #B10039 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este. Lowes.
CONTENIDO DEL PAQUETE B A C J K E I H G D F L PIEZA A B C D E F G H I J K L M M DESCRIPCIÓN Base Soporte de montaje Tubería Tuerca hexagonal (preensamblada al manguito roscado [H]) Ensamble del portalámpara Arandela de metal (preensamblada en el manguito roscado [H]) Arandela de nailon (preensamblada en el manguito roscado [H]) Manguito roscado Acoplador (preensamblado en el ensamble del portalámpara [E]) Anillo decorativo Pantalla de vidrio Tapa decorativa Remate 20 Lowes.
ADITAMENTOS (se muestran en tamaño real) AA BB Conectores de cables Tornillo Cant.: 3 para metal corto Cant.: 2 CC EE DD Arandela Cant.: 2 Perilla roscada Cant.: 2 Tornillo para metal largo Cant.: 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico.
INSTRUCCIONES DE ENSAMBLAJE 1. Oriente el soporte de montaje (B) de manera que la sección central elevada sobresalga en la caja de salida (no se incluye). Inserte los tornillos para metal largos (DD) por el soporte de montaje (B) para que sobresalgan hacia afuera. Conecte el soporte de montaje (B) a la caja de salida con los tornillos para metal cortos (BB). Aditamentos utilizados 1 Caja de salida BB Tornillo para BB metal corto x2 Tornillo para DD metal largo x2 B DD 2.
INSTRUCCIONES DE ENSAMBLAJE 3. Guía para la conexión de los conductores: Conductor de puesta a tierra: • Para la instalación en los Estados Unidos: Coloque el conductor de puesta a tierra de la caja de salida alrededor del tornillo de puesta a tierra preensamblado en el soporte de montaje (B), a no menos de 5,08 cm del extremo del conductor. Apriete el tornillo de puesta a tierra.
INSTRUCCIONES DE ENSAMBLAJE 5. Coloque las bombillas (no se incluyen). Use bombillas incandescentes de base candelabro de 60 vatios como máximo o bombillas halógenas/LED/CFL equivalentes. 5 E 6. Retire la arandela de metal (F), la arandela de nailon (G) y la tuerca hexagonal (D) del manguito roscado (H). Enrosque el manguito roscado (H) en el acoplador (I). 6a G D F H 6b H 7. Descienda el anillo decorativo (J) en la pantalla de vidrio (K). 7 6 J K 24 Lowes.
INSTRUCCIONES DE ENSAMBLAJE 8. Suba la pantalla de vidrio (K), la arandela de nailon (G) y la arandela de metal (F) sobre el manguito roscado (H) y fije con la tuerca hexagonal (D). 8 6 K H G D F 9. Pase la tapa decorativa (L) sobre el manguito roscado (H) y asegure con el remate (M). 9 6 H L M CUIDADO Y MANTENIMIENTO • Siempre asegúrese de que la corriente eléctrica esté desconectada antes de limpiar este artículo. • Utilice un paño húmedo suave y jabón suave no abrasivo para limpiar la lámpara.
GARANTÍA El Distribuidor garantiza que sus productos no presentarán defectos en los materiales ni en la mano de obra durante un período de un (1) año desde la fecha de compra por parte del Comprador original.
LISTA DE PIEZAS DE REPUESTO Para obtener piezas de repuesto, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.