welcoming • sophisticated allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. • inspiring ITEM #0612649 VANITY LIGHT MODEL #B10067 Français p. 9 ATTACH YOUR RECEIPT HERE Serial Number Español p. 17 Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday. EB14370 1 Lowes.
PACKAGE CONTENTS F B E A C D PART A B C D E F DESCRIPTION Canopy Mounting Bracket Shade Socket Ring (preassembled to Socket (E)) Socket (preassembled to Arm (F)) Arm (preassembled to Canopy (A)) 2 QUANTITY 1 1 1 1 1 1 Lowes.
HARDWARE CONTENTS (shown actual size) AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 CC DD Threaded Knob Qty: 2 Long Machine Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity.
ASSEMBLY INSTRUCTIONS 1. Orient the mounting bracket (B) so the raised center portion protrudes into the outlet box (not included). Insert long machine screws (DD) through mounting bracket (B) so the long machine screws (DD) protrude outward. Connect the mounting bracket (B) to the outlet box with short machine screws (BB). 1 DD B Outlet Box Hardware Used BB Short Machine Screw x2 Long Machine DD Screw x2 BB 2.
ASSEMBLY INSTRUCTIONS 3. Pass canopy (A) over the long machine screws (DD) protruding from the mounting bracket (B) and secure with threaded knobs (CC). 3 DD CC Hardware Used Threaded CC Knobs B x2 A 4. Remove socket ring (D) from socket (E). Attach shade (C) to socket (E), securing with socket ring (D). 4 E C D 5. Insert bulb (not included). Use 60-watt max. medium-base incandescent bulb or a CFL equivalent. 5 E 5 Lowes.
CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Fixture does not light. 1. Fixture may be wired incorrectly. 2.
WARRANTY (continued) This warranty does not apply to any products that have been subjected to misuse, mishandling, misapplication, connected to voltage at more than 5% above standard North American voltage, unusual use (including but not limited to use in an environment where the annual average ambient operating temperature is below 27 or above 95 degrees Fahrenheit), neglect (including but not limited to improper maintenance), accident, acts of god such as high winds, improper installation or care, failure
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday. PART B C D AA BB CC DD DESCRIPTION Mounting Bracket Shade Socket Ring Wire Connector Short Machine Screw Threaded Knob Long Machine Screw PART # XBAR05 SB10067 LR009 WC001 SCR832X050 TK1X832-LOZ SCR832X150 C B AA D CC BB DD Printed in China allen + roth® is a registered trademark of LF, LLC. All rights reserved. Rev.
welcoming • allen + roth ® est une marque de commerce déposée de LF, LLC. Tous droits réservés. sophisticated • inspiring ARTICLE #0612649 LUMINAIRE À 1 LUMIÈRE POUR MEUBLE-LAVABO MODÈLE #B10067 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi. Lowes.
CONTENU DE L’EMBALLAGE F B E A C D PIÈCE A B C D E F DESCRIPTION Couvercle Support de fixation Abat-jour Bague de douille (préassemblée à la douille [E]) Douille (préassemblée au bras [F]) Bras (préassemblé au couvercle [A]) 10 Lowes.
QUINCAILLERIE INCLUSE (grandeur réelle) AA BB Capuchon de connexion Vis à Qté : 3 métaux courte Qté : 2 CC DD Bouton fileté Qté : 2 Vis à métaux longue Qté : 2 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Coupez l’électricité avant TOUTE manipulation.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Placez le support de fixation (B) de façon à ce que la partie centrale surélevée sorte du côté de la boîte de sortie (non incluse). Insérez les vis à métaux longues (DD) dans le support de fixation (B) de façon à ce qu’elles dépassent de la boîte de sortie. Fixez le support de fixation (B) à la boîte de sortie à l’aide des vis à métaux courtes (BB). 1 DD B Boîte de sortie Quincaillerie utilisée BB Vis à métaux courte x2 Vis à métaux longue x2 DD BB 2.
INSTRUCTIONS POUR L'ASSEMBLAGE 3. Placez le couvercle (A) sur les vis à métaux longues (DD) qui sortent du support de fixation (B) et fixez-le à l’aide des boutons filetés (CC). 3 DD CC Quincaillerie utilisée Bouton CC fileté B x2 A 4. Retirez la bague de douille (D) de la douille (E). Fixez l’abat-jour (C) à la douille (E) à l’aide de la bague de douille (D). 4 E C D 5. Vissez l’ampoule (non incluse).
ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire. • Les abat-jour en verre peuvent être nettoyés dans un évier couvert de serviettes, à l’aide d’eau tiède et de savon doux. Ne nettoyez pas les abat-jour dans un lave-vaisselle. DÉPANNAGE PROBLÈME Le luminaire ne s’allume pas. CAUSE POSSIBLE 1.
GARANTIE (suite) Cette garantie ne couvre pas les produits qui ont été soumis à un usage inapproprié, à une manipulation inadéquate, à un emploi sur un circuit électrique caractérisé par une tension supérieure de plus de 5 % à la tension nominale nord-américaine standard, à un usage inhabituel (y compris, sans toutefois s’y limiter, l’utilisation dans un environnement où la température annuelle moyenne de fonctionnement est inférieure à 2,8 °C ou supérieure à 35 °C, à une négligence (y compris, sans toutefo
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.
welcoming • sophisticated allen + roth® es una marca registrada de LF, LLC. Todos los derechos reservados. • inspiring ARTÍCULO #0612649 TOCADOR DE 1 LUZ MODELO #B10067 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este. Lowes.
CONTENIDO DEL PAQUETE F B E A C D PIEZA A B C D E F DESCRIPCIÓN Base Soporte de montaje Pantalla Anillo del portalámpara (preensamblado al portalámpara [E]) Portalámpara (preensamblado al brazo [F]) Brazo (preensamblado a la base [A]) 18 Lowes.
ADITAMENTOS (tamaño real) AA BB Conectores de cables Tornillos Cant.: 3 para metales cortos Cant.: 2 CC DD Perillas roscadas Cant.: 2 Tornillos para metales largos Cant.: 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico. Coloque el interruptor de alimentación principal en la posición “OFF” (APAGADO).
INSTRUCCIONES DE ENSAMBLAJE 1. Oriente el soporte de montaje (B) de modo tal que la sección central elevada sobresalga hacia el interior de la caja de salida (no se incluye). Inserte los tornillos largos para metales (DD) por el soporte de montaje (B) de modo que dichos tornillos (DD) sobresalgan. Conecte el soporte de montaje (B) a la caja de salida con los tornillos cortos para metales (BB).
INSTRUCCIONES DE ENSAMBLAJE 3. Pase la base (A) sobre los tornillos largos para metales (DD) que sobresalen del soporte de montaje (B) y asegúrela con las perillas roscadas (CC). 3 DD CC Aditamentos utilizados Perillas CC roscadas B x2 A 4. Retire el anillo (D) del portalámpara (E).Fije la pantalla (C) al portalámpara (E) y asegúrelas con el anillo (D). 4 E C D 5. Inserte la bombilla (no se incluye).
CUIDADO Y MANTENIMIENTO • Siempre asegúrese de que la corriente eléctrica esté desconectada antes de limpiar. • Utilice un paño húmedo suave y jabón suave no abrasivo para limpiar la lámpara. Nunca utilice un limpiador para vidrio en la lámpara, porque este dañará el acabado metálico. • Las pantallas de vidrio se pueden lavar dentro de un lavabo recubierto con toallas usando agua tibia y jabón suave. No lave las pantallas en un lavaplatos automático.
GARANTÍA (continuación) Esta garantía no se aplica a ningún producto que haya sido sometido a uso inadecuado, maltrato, aplicación inapropiada, conexión a un voltaje superior en un 5 % al voltaje estándar estadounidense, uso no convencional (incluido, entre otros, el uso en un entorno con temperatura de funcionamiento ambiente promedio anual inferior a 27 o superior a 95 grados Fahrenheit [inferior a -2,77 o superior a 35 grados centígrados]), negligencia (incluido, entre otros, el mantenimiento inadecuado)
REPLACEMENT PARTS LIST Para obtener piezas de repuesto, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.