welcoming • sophisticated allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. • inspiring ITEM #0639160 9-LIGHT CHANDELIER MODEL #B10091 Français p. 11 ATTACH YOUR RECEIPT HERE Serial Number Español p. 21 Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday. EB15129 1 Lowes.
PACKAGE CONTENTS B A D C H I L F K P O E G N J M PART DESCRIPTION QTY. A Canopy 1 Mounting Bracket B 1 C 1 Threaded Nipple (preassembled) D 3 Hex Nut (preassembled) Socket (preassembled) E 9 F 1 Upper Coupling (preassembled) G 9 Bobeche H Screw Collar Ring (preassembled) 1 PART DESCRIPTION QTY.
HARDWARE CONTENTS (shown actual size) AA Wire Connector Qty: 3 BB CC Decorative Arm Short Screw Machine Screw Qty: 12 Qty: 2 DD Lower Fixture Loop Qty: 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity.
ASSEMBLY INSTRUCTIONS 1. Before you install this fixture be sure to spread the arms (O) out evenly. 1a O 1b O 2. Screw upper fixture loop (L) into the upper coupling (F). Then, screw the lower fixture loop (DD) into the lower coupling (J). 2 L F Hardware Used Lower Fixture DD Loop x1 J DD 4 Lowes.
ASSEMBLY INSTRUCTIONS 3. Raise the decorative arms (M) to the socket bases (N). Pass decorative arm screw (CC) through the socket base (N) and into the decorative arm (M). 3 CC Hardware Used Decorative Arm CC P Screw CC x 12 N N M 4. Position threaded nipple (C) in mounting bracket (B) so that, when mounted: • • The threaded nipple (C) will protrude a minimum of 1/4 inch beyond the raised center portion of the bracket (B).
ASSEMBLY INSTRUCTIONS 6. Attach mounting bracket (B) to the outlet box with short machine screws (BB). 6 Outlet Box Hardware Used BB Short Machine Screw x2 B C BB 7. Thread chain (K) though screw collar ring (H) and canopy (A). Using the open chain links on chain (K), attach one end to screw collar loop (I) and the other end to fixture loop (L). Weave the fixture electrical and ground wires through every other chain link and pass through threaded nipple (C) into outlet box.
ASSEMBLY INSTRUCTIONS 8. Wire connection guide: Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw preassembed on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 10. Lower bobeche (G) over socket (E). Insert 60-watt max. candelabra-base incandescent bulb or CFL equivalent (none included). 10 Repeat for remaining sockets (E). G E CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE 1.CORRECTIVE Check wiring.
WARRANTY The Distributor warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Distributor the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.
welcoming • sophisticated allen + roth® est une marque de commerce déposée de LF, LLC. Tous droits réservés. • inspiring ARTICLE #0639160 LUSTRE À 9 LUMIÈRES MODÈLE #B10091 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi. 11 Lowes.
CONTENU DE L’EMBALLAGE B A D C H I L F K P O E G N J M PIÈCE DESCRIPTION QTÈ. A Couvercle 1 Support de fixation B 1 C 1 Tige filetée (préassemblée) D 3 Écrou hexagonal (préassemblé) Douille (préassemblée) E 9 F 1 Raccord supérieur (préassemblé) G 9 Bobèche H Bague de collier à anneau (préassemblée) 1 PIÈCE DESCRIPTION QTÈ.
QUINCAILLERIE INCLUSE (grandeur réelle) AA BB CC Vis de Capuchon bras de connexion Vis à décoratif Qté : 3 métaux courtes Qté : 12 Qté : 2 DD Anneau de suspension inférieur Qté : 1 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Coupez l’électricité avant TOUTE manipulation.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Avant d’installer ce luminaire, assurez-vous d’ouvrir les bras (O) de façon à ce qu’ils soient tous placés de façon égale. 1a O 1b O 2. Vissez l’anneau de suspension supérieur (L) au raccord supérieur (F). Vissez ensuite l’anneau de suspension inférieur (DD) au raccord inférieur (J). 2 L F Quincaillerie utilisée Anneau de DD suspension inférieur x1 J DD 14 Lowes.
INSTRUCTIONS POUR L'ASSEMBLAGE 3. Soulevez les bras décoratifs (M) de façon à les placer à la même hauteur que les bases de douille (N). Faites passer la vis de bras décoratif (CC) à travers la base de douille (N) et dans le bras décoratif (M). 3 CC CC Quincaillerie utilisée P CC Vis de bras décoratif x 12 N N M 4.
INSTRUCTIONS POUR L'ASSEMBLAGE 6. Fixez le support de fixation (B) à la boîte de sortie à l’aide des vis à métaux courtes (BB). 6 Boîte de sortie Quincaillerie utilisée BB Vis à métaux courtes x2 B C BB 7. Faites passer la chaîne (K) à travers la bague de collier à anneau (H) et le couvercle (A). À l’aide des maillons ouverts, fixez une extrémité de la chaîne (K) au collier à anneau de suspension (I) et l’autre extrémité à l’anneau de suspension (L).
INSTRUCTIONS POUR L'ASSEMBLAGE 8. Guide de raccordement électrique: Fil de mise à la terre: • Pour une installation aux États-Unis: Enroulez le fil de mise à la terre de la boîte de sortie autour de la vis de mise à la terre préassemblée au support de fixation (B), à au moins 5,08 cm de l’extrémité du fil. Si le luminaire est fourni avec un fil de mise à la terre, raccordez-le au fil de mise à la terre de la boîte de sortie à l’aide d’un connecteur de fils (AA).
INSTRUCTIONS POUR L'ASSEMBLAGE 10. Faites glisser la bobèche (G) sur la douille (E). Insérez une ampoule à incandescence à petit culot d’un maximum de 60 W ou une ampoule fluocompacte équivalente (non incluses). 10 Répétez cette étape pour les douilles restantes (E). G E ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif.
GARANTIE Le distributeur garantit ses articles contre les défauts de matériaux et de fabrication pour une période de un (1) an à compter de la date d’achat par l’acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.
welcoming • sophisticated allen + roth® es una marca registrada de LF, LLC. Todos los derechos reservados. • inspiring ARTÍCULO #0639160 CANDELABRO DE 9 LUCES MODELO #B10091 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este. 21 Lowes.
CONTENIDO DEL PAQUETE B A D C H I L F K P O E G N J M PIEZA DESCRIPCIÓN CANT. A Cubierta 1 Soporte de montaje B 1 C Manguito roscado (preensamblado) 1 D Tuerca hexagonal (preensamblada) 3 Portalámpara (preensamblado) E 9 F 1 Acoplador superior (preensamblado) G 9 Bobeche H 1 Aro de la anilla de enganche roscado (preensamblado) PIEZA DESCRIPCIÓN CANT.
ADITAMENTOS (tamaño real) AA BB CC DD Tornillo del Conectores brazo de cables Tornillos decorativo Cant. 3 para metales Cant. 12 Enganche de la lámpara cortos inferior Cant. 2 Cant. 1 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico. Coloque el interruptor de alimentación principal en la posición “OFF” (APAGADO).
INSTRUCCIONES DE ENSAMBLAJE 1. Antes de instalar la lámpara, asegúrese de extender los brazos (O) de manera uniforme. 1a O 1b O 2. Atornille el enganche de la lámpara superior (L) en el acoplador superior (F). Luego, atornille el enganche inferior (DD) en el acoplador inferior (J). 2 L F Aditamentos utilizados Enganche de DD la lámpara inferior x1 J DD 24 Lowes.
INSTRUCCIONES DE ENSAMBLAJE 3. Levante los brazos decorativos (M) hasta las bases de los portalámparas (N). Pase el tornillo del brazo decorativo (CC) a través de la base del portalámparas (N) e insértelo en el brazo decorativo (M). 3 CC CC Aditamentos utilizados P CC Tornillo del brazo decorativo x 12 N N M 4.
INSTRUCCIONES DE ENSAMBLAJE 6. Fije el soporte de montaje (B) a la caja de salida con los tornillos cortos para metales (BB). 6 Caja de salida Aditamentos utilizados BB Tornillos para metales cortos x2 B C BB 7. Enrosque la cadena (K) al aro de la anilla de enganche roscado (H) y a la base (A). Use los eslabones de cadena abiertos (K), fije un extremo a la anilla de enganche roscada (I) y el otro extremo al enganche de la lámpara (L).
INSTRUCCIONES DE ENSAMBLAJE 8. Guía de conexión de cables: Cable a tierra: • Para la instalación en los Estados Unidos: Coloque el conductor de puesta a tierra de la caja de salida alrededor del tornillo de puesta a tierra preensamblado en el soporte de montaje (B), a no menos de 5,08 cm del extremo del conductor. Si la lámpara viene con un cable a tierra, conéctelo al cable a tierra de la caja eléctrica con un conector de cables (AA).
INSTRUCCIONES DE ENSAMBLAJE 10. Descienda el bobeche (G) sobre el portalámpara (E). Coloque una bombilla incandescente de base candelabro de 60 vatios como máximo o una bombilla CFL equivalente (no se incluye). 10 Repita este procedimiento con los portalámparas restantes (E). G E CUIDADO Y MANTENIMIENTO • Siempre asegúrese de que la corriente eléctrica esté desconectada antes de limpiar. • Utilice un paño húmedo suave y jabón suave no abrasivo para limpiar la lámpara.
SOLUCIÓN DE PROBLEMAS El Distribuidor garantiza que sus productos no presentarán defectos en los materiales ni en la mano de obra durante un período de un (1) año desde la fecha de compra por parte del Comprador original.
LISTA DE PIEZAS DE REPUESTO Para obtener piezas de repuesto, llame al Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.