Installation Guide

ASSEMBLY INSTRUCTIONS
6
Hardware Used
Short Machine
Screw
x 2
BB
5. Connect mounting bracket (B) to the outlet box
(not included) with short machine screws (BB).
5
Outlet Box
C
B
BB
CAUTION: To avoid damage from falling, make
sure the open chain links are fully closed once
assembled.
R
H
A
K
I
C
6
Outlet
Box
6. Thread chain (K) though screw collar ring (H) and
canopy (A). Using the open chain links on chain
(K), attach one end to screw collar loop (I) and the
other end to upper fixture loop (R). Weave the
fixture electrical and ground wires through every
other chain link and pass through threaded nipple
(C) into outlet box. Lower the screw collar ring (H)
and canopy (A) over the chain (K).