welcoming • allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. sophisticated • inspiring ITEM #0810101 9-LIGHT CHANDELIER MODEL #B10125 Français p. 11 Español p. 21 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.
PACKAGE CONTENTS B A D R C H L I N T F G O K E M PART DESCRIPTION QTY.
HARDWARE CONTENTS AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch “OFF” the circuit breaker switch(es), that control the power to the fixture or room you are working in.
ASSEMBLY INSTRUCTIONS 1. Before you install this fixture be sure to spread the arms (M) out evenly. 1 M 2. Screw upper threaded pipe (T) onto upper coupling (F). Pass decorative cap (L) over upper threaded pipe (T) and secure with fixture loop (R). 2a R L Screw threaded pipe (Q) onto lower coupling (J). Pass lower decorative cap (S) over threaded pipe (Q) and secure with finial (P).
ASSEMBLY INSTRUCTIONS 3. Position threaded nipple (C) in mounting bracket (B) so when mounted: • • 3 The threaded nipple (C) will protrude a minimum of 1/4 inch beyond the raised center portion of the mounting bracket (B). The threaded nipple (C) height is positioned so 1/2 the exterior threads of the screw collar loop (I) will extend past the canopy (A) when it is mounted. B 1/4 Inch C A I Note: Canopy is only needed to determine the position of the threaded nipple and fixture loop.
ASSEMBLY INSTRUCTIONS 5. Connect mounting bracket (B) to the outlet box (not included) with short machine screws (BB). 5 Outlet Box Hardware Used BB Short Machine Screw x2 B C BB 6. Thread chain (K) though screw collar ring (H) and canopy (A). Using the open chain links on chain (K), attach one end to screw collar loop (I) and the other end to upper fixture loop (R). Weave the fixture electrical and ground wires through every other chain link and pass through threaded nipple (C) into outlet box.
ASSEMBLY INSTRUCTIONS 7. Wire connection guide: Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw preassembled on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 9. Lower shade (O), bobeche (G), and socket cover (N) over socket (E). 9 Repeat for remaining sockets. N G O E 10. Insert 60-watt max. candelabra-base bulb or CFL/LED equivalent (not included) into socket (E). 10 Repeat for remaining sockets. E CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture.
WARRANTY The Distributor warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Distributor the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.
welcoming • allen + roth ® est une marque de commerce déposée de LF, LLC. Tous droits réservés. sophisticated • inspiring ARTICLE #0810101 LUSTRE À 9 LUMIÈRES MODÈLE #B10125 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.
CONTENU DE L’EMBALLAGE B A D R C H L I N T F G O K E PIÈCE DESCRIPTION QTÉ A Couvercle 1 Support de fixation B 1 C 1 Tige filetée (préassemblé) D 5 Écrou hexagonal (préassemblé) Douille (préassemblé) E 9 F 1 Raccord supérieur (préassemblé) G 9 Bobèche H Bague de collier à anneau (préassemblé) 1 1 I Collier à anneau de suspension (préassemblé) J 1 Raccord inférieur (préassemblé) M PIÈCE K L M N O P Q R S T 12 Q J P S DESCRIPTION Chaîne Capuchon décoratif Bras (préassemblé) Capuchon de dou
QUINCAILLERIE INCLUSE (grandeur réelle) AA BB Capuchon de connexion Vis à Qté : 3 métaux courte Qté : 2 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Coupez l’électricité avant TOUTE manipulation. • Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en position d’arrêt (« OFF »).
INSTRUCTIONS POUR L’ASSEMBLAGE 1. Avant d’installer ce luminaire, assurez-vous d’ouvrir les bras (M) de façon à ce qu’ils soient tous placés de façon égale. 1 M 2. Vissez le tube fileté (T) au raccord supérieur (F). Faites passer le capuchon décoratif (L) sur le tube fileté supérieur (T) et fixez-le à l’aide de l’anneau de suspension (R). 2a R L Vissez le tube fileté (Q) au raccord inférieur (J).
INSTRUCTIONS POUR L’ASSEMBLAGE 3. Insérez la tige filetée (C) dans le support de fixation (B) en respectant ce qui suit : • • 3 La tige filetée (C) doit dépasser d’au moins 6,35 mm la partie centrale surélevée du support de fixation (B). La tige filetée (C) doit être positionnée de façon à ce que la moitié du filetage extérieur au collier à anneau de suspension (I) dépasse du couvercle (A) lorsque celui-ci est fixé.
INSTRUCTIONS POUR L’ASSEMBLAGE 5. Fixez le support de fixation (B) à la boîte de sortie (non incluse) à l’aide des vis à métaux courtes (BB). 5 Boîte de sortie Quincaillerie utilisée BB Vis à métaux courte x2 B C BB 6. Faites passer la chaîne (J) à travers la bague de collier à anneau (H) et le couvercle (A). À l’aide des maillons ouverts, fixez une extrémité de la chaîne (J) au collier à anneau de suspension (I) et l’autre extrémité à l’anneau de suspension (G) supérieur.
INSTRUCTIONS POUR L’ASSEMBLAGE 7. Guide pour la connexion des fils : 7 Fil de mise à la terre : • Pour une installation aux États-Unis : Enroulez le fil de mise à la terre de la boîte de sortie autour de la vis de mise à la terre du support de fixation (B), à au moins 5,08 cm de l’extrémité du fil. Serrez la vis de mise à la terre. Si le luminaire est muni d’un fil de mise à la terre, raccordez-le au fil de mise à la terre de la boîte de sortie à l’aide d’un capuchon de connexion (AA).
INSTRUCTIONS POUR L’ASSEMBLAGE 9. Faites glisser l’abat-jour (O), la bobèche (G) et le capuchon de douille (N) sur la douille (E). 9 N Répétez cette étape pour les douilles restantes. G O E 10. Insérez une ampoule à petit culot d’un maximum de 60 watts ou une ampoule fluocompacte ou à DEL équivalente (non incluse) dans la douille (E). 10 Répétez cette étape pour les douilles restantes. E ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire.
GARANTIE Le distributeur garantit ses articles contre les défauts de matériaux et de fabrication pour une période de un (1) an à compter de la date d’achat par l’acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, communiquez avec notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.
welcoming • sophisticated allen + roth® es una marca registrada de LF, LLC. Todos los derechos reservados. • inspiring ARTÍCULO #0810101 CANDELABRO DE 5 LUCES MODELO #B10125 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.
CONTENIDO DEL PAQUETE B A D R C H L I N T F G O K E PIEZA DESCRIPCIÓN CANT A Base 1 Soporte de montaje B 1 C 1 Manguito roscado (preensamblado) D 5 Tuerca hexagonal (preensamblado) Tomacorrientes (preensamblado) E 9 F 1 Acoplador superior (preensamblado) G 9 Bobeche H Aro de la anilla de enganche (preensamblado) 1 1 I Bucle de la anilla de enganche (preensamblado) J 1 Acoplador inferior (preensamblado) M PIEZA K L M N O P Q R S T 22 Q J P S DESCRIPCIÓN Cadena Tapa decorativa Brazo (pree
ADITAMENTOS (se muestran en tamaño real) AA BB Conector de cables Tornillo Cant.: 3 para metales cortos Cant.: 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico. Coloque el interruptor de alimentación principal en la posición “OFF” (APAGADO). Coloque el interruptor de la pared en la posición “OFF” (APAGADO).
INSTRUCCIONES DE ENSAMBLAJE 1. Antes de instalar esta lámpara, asegúrese de separar los brazos (M) de forma uniforme. 1 M 2. Atornille la tubería roscada superior (T) al acoplador superior (F). Coloque la tapa decorativa (L) sobre la tubería roscada superior (T) y asegúrela con el bucle de la lámpara (R). 2a R L Atornille la tubería roscada (Q) al acoplador inferior (J). Coloque la tapa decorativa inferior (S) sobre la tubería roscada (Q) y asegúrela con el remate (P).
INSTRUCCIONES DE ENSAMBLAJE 3. Coloque el manguito roscado (C) en el soporte de montaje (B) de modo que: • • 3 El manguito roscado (C) sobresaldrá un mínimo de 1/4 de pulgada (6,35 mm) de la parte central elevada del soporte del montaje (B). La altura del manguito roscado (C) está ubicada de modo que 1/2 de las roscas exteriores del bucle de la anilla de enganche (I) sobresalgan de la base (A) cuando esté montada.
INSTRUCCIONES DE ENSAMBLAJE 5. Conecte el soporte de montaje (B) a la caja de salida (no incluida) con tornillos para metal cortos (BB). 5 Caja de salida Aditamentos utilizados BB Tornillo para metales cortos x2 B C BB 6. Enrosque la cadena (J) a través del aro de la anilla de enganche (H) y de la base (A). Utilizando los eslabones de cadena abiertos en la cadena (J), fije uno de los extremos al bucle de la anilla de enganche (I) y el otro al bucle superior de la lámpara (G).
INSTRUCCIONES DE ENSAMBLAJE 7. Guía de conexión de conductores: CONDUCTOR DE DE PUESTA A TIERRA DE LA LÁMPARA DE AA COBRE CONDUCTOR DE DESNUDO ALIMENTACIÓN O VERDE 7 Cable con conexión a tierra: • Para la instalación en los Estados Unidos: Envuelva el cable con conexión a tierra de la caja de salida alrededor del tornillo de tierra en el soporte de montaje (B) a no menos de 2 pulg. (5,08 cm) del extremo del cable. Apriete el tornillo de tierra.
INSTRUCCIONES DE ENSAMBLAJE 9. Baje la persiana (O), el bobeche (G) y la cubierta del tomacorrientes (N) sobre el tomacorrientes (E). 9 N Repita el procedimiento para los tomacorrientes restantes. G O E 10. Inserte una bombilla con casquillo E12 máx. 60 vatios o equivalente de CFL/LED (no incluida) en el tomacorrientes (E). 10 Repita el procedimiento para los tomacorrientes restantes. E CUIDADO Y MANTENIMIENTO • Siempre asegúrese de que la corriente eléctrica esté desconectada antes de limpiar.
GARANTÍA El distribuidor garantiza que sus productos no presentará defectos de fabricación en el material o la mano de obra durante un período de un (1) año desde la fecha de su compra original.
LISTA DE PIEZAS DE REPUESTO Para obtener piezas de repuesto, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves, de 8 a.m. a 6 p.m. hora estándar del Este y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.