Installation Guide

8
Prepare wire by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included).
Tie wire into a knot.
Connect RIBBED wire from the fixture (A) to
WHITE wire from outlet box using existing wire
connector or wire connector (AA). Connect the
SMOOTH wire from the fixture (A) to BLACK wire
from outlet box using existing wire connector or
wire connector (AA). Connect BARE/GREEN
ground wire from outlet box to BARE ground wire
from fixture (A) using wire connector (AA).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA)
provided with this light fixture are designed to
accept only one 12-gauge house wire and two
lead wires from the light fixture. If your house wire
is larger than 12-gauge or there is more than one
house wire to connect to the corresponding fixture
lead wires, consult an electrician for the proper
size wire connectors to use.
Outlet Box
RIBBED
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
Outlet Box
WHITE
8b
9
8a.
9.
8a
A
AA
A
AA
Hardware Used
Wire Connector
x 3
AA
ASSEMBLY INSTRUCTIONS
8b.
BARE
SMOOTH
BLACK
AA
BARE/
GREEN
E
AA
AA
AA