welcoming • sophisticated • inspiring E232083 allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. ITEM #0810125 3-LIGHT CHANDELIER MODEL #CH17-3BZ Français p. 11 Español p. 21 ATTACH YOUR RECEIPT HERE Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
PACKAGE CONTENTS PART DESCRIPTION QUANTITY A A B Fixture 6-inch Rod (preassembled to fixture (A)) 12-inch Rod (preassembled to fixture (A)) Arm (preassembled to fixture (A)) Mounting Plate (preassembled to fixture (A)) Screw (preassembled to mounting plate (E)) Nut (preassembled to screw (F)) Decorative Nut (preassembled to screw (F)) Thumbscrew (9 preassembled to arm (D)) Glass Shade 1 2 B C D E F G H I J E 4 C 3 F G 1 2 2 D H 2 11 3 I J HARDWARE CONTENTS (shown actual size) AA Wire Conne
SAFETY INFORMATION DANGER • DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use a fixture in a two-wire system that is not grounded. Installing a fixture into an electrical system not having a proper grounding means could cause metal parts of the fixture to carry electrical currents if any of the fixture wires, wire connections or splices were to become broken, cut or loose during the mounting or normal operation of the fixture.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
ASSEMBLY INSTRUCTIONS 3. Remove mounting plate (E) from fixture (A) by removing decorative nuts (H). 3 Save decorative nuts (H) for later use. E A H 4. Attach mounting plate (E) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding.
ASSEMBLY INSTRUCTIONS 5. Temporarily place fixture (A) over mounting plate (E) to determine amount of adjustment necessary for screws (F) -- screws (F) should come through holes in fixture (A) just enough so decorative nuts (H) will fit flush against fixture (A) when mounted. 5 E G F Once screws (F) are adjusted, use pliers (not included) to tighten preassembled nuts (G) on screws (F) until nuts (G) touch mounting plate (E). A H 6.
ASSEMBLY INSTRUCTIONS 7. There are several different ways to use the fixture (A) depending on the number and combination of rods (B and C) you decide to use: Locate swivel connector piece under canopy on fixture (A). Rotate swivel connector piece until it aligns with canopy base. [NOTE: This may require some force.
ASSEMBLY INSTRUCTIONS 8a. Prepare wire by stripping 3/4 in. of insulation from wire ends using wire strippers (not included). Tie wire into a knot. 8a 8b. Connect RIBBED wire from the fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect the SMOOTH wire from the fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA).
ASSEMBLY INSTRUCTIONS 10. Carefully arrange excess wiring and wire connectors (AA) within canopy on fixture (A). Align holes in canopy of fixture (A) with screws (F) on mounting plate (E) and push up. Secure fixture (A) to mounting plate (E) with decorative nuts (H) previously removed (Step 3, page 5). 10 Outlet Box AA E F A H 11. Install three standard-base bulbs (not included). Use 60-watt max. incandescent bulbs or CFL equivalent.
CARE AND MAINTENANCE • Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass. Do not use an abrasive cleaner on glass or fixture. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM Bulb(s) will not light. POSSIBLE CAUSE 1. Bulb(s) is/are burned out. 2. Power is OFF. 3. Faulty connection. CORRECTIVE ACTION 1. Replace light bulb(s). 2. Make sure power supply is ON. 3. Check wiring and all connections.