Installation Guide

ASSEMBLY INSTRUCTIONS
7
Place edge of glass shade (B) into clips (E)
attached with short screws (F).
Gently pull on clip (E) attached with long screw (G)
until clip (E) hooks over edge of glass shade (B).
8.
9.
Restore power and test fixture (A).
If light does not function, please refer to the
TROUBLESHOOTING guide on the next page.
9
A
7.
7
Carefully arrange excess wiring and wire
connectors (AA) within outlet box.
Align key-slot holes on fixture (A) with fixture
screws (D) on mounting strap (C) and push up.
Turn fixture (A) clockwise until it no longer turns.
Secure fixture (A) to mounting strap (C) by
tightening the fixture screws (D).
Outlet Box
D
D
C
A
8a
B
B
E
G
E
8b
E
F
G