Installation Guide

Prepare wire by stripping 1/2 in. of insulation from

wire ends using wire strippers (not included).

Unwrap BARE wire from BLACK and WHITE wires.

Connect WHITE wire from light kit (A) to WHITE

wire from outlet box using existing wire connector or

wire connector (AA). Connect BLACK wire from light

kit (A) to BLACK wire from outlet box using existing

wire connector or wire connector (AA). Connect

BARE/GREEN ground wire from outlet box to BARE

wire from light kit (A) using existing wire connector

or wire connector (AA).

NOTE: Screw wire connectors (AA) on in a

clockwise direction.

WARNING: Never connect ground wire to

WHITE or BLACK power supply wires.

WARNING: To reduce the risk of fire, electrical

shock or personal injury, wire connectors (AA)

provided with this light fixture are designed to

accept only one 12-gauge house wire and two lead

wires from the light fixture. If your house wire is

larger than 12-gauge or there is more than one

house wire to connect to the corresponding fixture

lead wires, consult an electrician for the proper size

wire connectors to use.

ASSEMBLY INSTRUCTIONS

5a.

x 3

Hardware Used

Wire Connector

Outlet Box

BARE/

GREEN

WHITE

BLACK

BARE

Wrap electrical tape (not included) around each

individual wire connector (AA) down to the wire.

Push wire connectors (AA) gently back into outlet

box. Carefully push excess wiring into outlet box.

WARNING: Make sure no bare wire or wire

strands are visible after making connections.

5b.

WHITE

BLACK

Outlet Box