Installation Guide

ASSEMBLY INSTRUCTIONS

Attach fixture (B) to light kit (A) aligning three

screws on fixture (B) with three screw holes on

light kit (A) and replace nuts (D) previously

removed (step 3, page 6). Make sure nuts (D)

are secure.

Restore power and test fixture.

If fixture does not function, please refer to

TROUBLESHOOTING below.

WARRANTY

Printed In China

GGLI1910

The distributor warrants all of its lighting fixtures against defects in materials and workmanship for

five (5) years from the date of purchase. If within this period the product is found to be defective, take

a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of

purchase. The distributor will, at its option, repair, replace or refund the purchase price to the

consumer. All costs of installation and removal of the fixture is the responsibility of the consumer. This

warranty does not cover fixtures becoming defective due to misuse, accidental damage or improper

handling and/or installation and specifically excludes liability for direct, incidental or consequential

damages, improper packaging of returned products and acts of God. As some states do not allow

exclusions of limitations on an implied warranty, the above exclusion and limitation may not apply.

This warranty gives you specific rights and you may also have other rights which may vary from state

to state.

CARE AND MAINTENANCE

TROUBLESHOOTING

• Shut off main power supply. Wipe fixture with soft cloth. Use window cleaner to clean glass. Do not

use an abrasive cleaner on glass or fixture.

• Total wattage for this fixture is 17 watts; do not attempt to replace the LEDs.

WARNING: Before beginning work, shut off the power supply to avoid electrical shock.

Light does not come on

initially or no longer

comes on.

Fuse blows out or

circuit breaker trips.

1. Power is OFF.

2. Faulty connection.

3. LED component is not working

properly.

1. Crossed wires.

2. Power wire is grounding out.

1. Check wiring.

2. Check all connections.

1. Make sure power supply is ON.

2. Check wiring and all connections.

3. Contact Customer Service.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION