Installation Guide

ASSEMBLY INSTRUCTIONS
7
CARE AND MAINTENANCE
6.
Align keyslot holes on fixture (A) with fixture
screws (D) on mounting strap (C) and push
up. Turn fixture (A) clockwise until it no
longer turns. Secure fixture (A) to mounting
strap (C) by tightening the fixture screws (D).
• Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass.
Do not use an abrasive cleaner on glass or fixture.
• Total wattage for this fixture is 25 watts; do not attempt to replace the LEDs.
6
D
A
Outlet Box
D
D
C
7.
Restore power and test fixture (A).
If fixtures do not function, please refer to
TROUBLESHOOTING on next page.
Align slots on glass shade (B) with protrusions on
fixture (A). Turn glass shade (B) clockwise until it no
longer turns.
NOTE: Pull down gently on the glass shade (B) to
make sure it is secured completely.
NOTE: The use of rubber grip gloves are
recommended to make it easier to turn the glass
shade (B).
7
B
A