Installation Guide

2
3
PACKAGE CONTENTS
Wire nut
Qty. 3
SAFETY INFORMATION
WARNING
CAUTION
PREPARATION
HARDWARE CONTENTS (shown actual size)
B
DD
B
AA
B B
BB CC
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning
installation by removing fuse (or switching off circuit breaker).
• MINIMUM 90°C SUPPLY CONDUCTORS.
• CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT
CONDUCTOR.
• If in doubt about electrical installation, consult a licensed electrician.
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Assembly Time: 25 minutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers,
Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Machine
screw
Qty. 2
A
A
A
A
A
A
B
C
D
E
Crossbar
(Not actual size)
Qty. 1
Cap nut
(Preassembled
to Crossbar
(CC))
Qty. 2
allenandroth.com
allenandroth.com
PART DESCRIPTION QUANTITY
A Ceiling plate 1
B Short stem 2
C Stem 4
D Fixture 1
E Bulb 18