Use and Care Guide

ASSEMBLY INSTRUCTIONS
1.
Carefully place the table top (2) upside down on a soft surface. Failure to do
so could result in damage or scratches to the table top. Attach table leg A (3),
table leg B (4) and table legs C (5) to the table top (2). Use bolt and washer (AA).
1
ATTENTION: Assembly is
easiest when you partially
tighten bolts at first. Only
tighten by hand.
2
ATTENTION: Assembly is
easiest when you partially
tighten bolts at first. Only
tighten by hand.
2. Attach side panels A (6) to the table legs (3, 4 & 5). Use bolt and washer (AA).
3
3. Attach the gas barrier (8) to the table leg A (3) and table leg B (4).
Use bolt and washer (AA).
4
4. Attach the tank base (9) to the table leg A (3), table leg B (4) and table legs C (5).
8
AA
Hardware Used
Hardware Used
M6 x 15 mm Bolt and Washer
AA
x 4
x 12
AA
5
2
3
4
5
AA
4
5
3
6
5
AA
3
4
8
AA
Hardware Used
x 2
AA
4
3
5
5
9
Use bolt and washer (AA).
AA
Hardware Used
x 4
M6 x 15 mm Bolt and Washer
M6 x 15 mm Bolt and Washer
M6 x 15 mm Bolt and Washer