Use and Care Guide

ASSEMBLY INSTRUCTIONS
1.
Carefully place the top (1) upside down on a soft surface. Failure to do so
could result in damage or scratches to the tabletop. Attach the side panel A(2),
and side panel B(3) to the top (1). Use bolts (AA).
1
ATTENTION: Assembly is
easiest when you partially
tighten bolts at first. Only
tighten by hand.
2
ATTENTION: Assembly is
easiest when you partially
tighten bolts at first. Only
tighten by hand.
2. Attach the side panel C(4) to the side panel A(2) and side panel B(3).
Use bolts (AA) to fasten the connectors(7).
3
3. Attach the tank base (6) to the side panel A(2) and side panel B(3).
Use bolts (BB) and screw caps (CC).
4
4. Attach the side panel D(5) to the side panel A(2)
8
M6 x 15 mm Bolt
AA
Hardware Used
BB
Hardware Used
Hardware Used
M6 x 15 mm Bolt
AA
x 4
x 8
x 4
Screw Caps
CC
x 4
2
3
1
AA
AA
AA
3
2
7
4
3
2
6
BB
CC
M6 x 20 mm Bolt
2
5