How to Guide

1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1-866-439-9800 toll-free. Please have your
owner’s manual and model number available for reference.
Note: The model number is printed on a label which can be found on the inside door,
back or side of the base assembly.
Assembly Tips:
1. Select an area where you will assemble this product. To protect components,
choose a smooth surface that’s free of cracks or openings.
2. Spread out all parts.
3. Tighten all hardware connections by hand first. Then, before completing each
step, go back and fully tighten all hardware. Be careful not to over-tighten.
That could damage surfaces or strip threads.
4. For best results, complete each step in the order presented.
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the solution are
included in the “Operating Instructions” section of this manual).
• (1) Precision-filled LP gas grill tank with Acme Type 1 external threaded valve
connection (standard grill size) (not included).
Typical assembly is approximately one hour.
W CAUTION: Two (2) people will be required for assembly.
W WARNING: Failure to position the parts in accordance with
these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage
or personal injury.
Assembly Instructions
4
Attach Side and Rear Panels
Note: Attach bottom screws before attaching top screws. Do not fully tighten screws
until step 5.
A
x 12
3
Attach Legs
W CAUTION: TWO (2) PEOPLE WILL BE REQUIRED TO TURN THE
OUTDOOR FIRE PIT OVER.
W CAUTION: TO AVOID SCRATCHES CHOOSE A SMOOTH SURFACE
THAT’S FREE OF CRACKS OR OPENINGS.
Note: Do not fully tighten screws until step 5.
A
x 8
2
Turn Outdoor Fire Pit Over
W CAUTION: Two (2) people will be required to turn the outdoor
fire pit over.
W CAUTION: To avoid scratches choose a smooth surface that’s
free of cracks or openings.
11
11
13
12
A
6
A
Need help? 1-866-439-9800, 8 a.m - 8 p.m., EST, Monday - Sunday.
Do not return to place of purchase