Installation Guide

3.
7
Lowes.com/harborbreeze
Determine the approximate position of where you
want the fan to be located on the wall. Then,
locate the stud in the wall. Position wall mounting
bracket (B) on wood stud or wood post and mark
the location of the four holes using a pencil or a
marker (not included).
WARNING: To reduce the risk of fire,
electrical shock or personal injury, use all four
mounting holes (two at the top and two at the
bottom) in wall mounting bracket (B) when
installing wall mounting bracket (B).
Wood Screw x 4
Hardware Used
AA
Stud
7 Ft.
3
AA
B
Stud
4
AA
B
4.
Use 3/32-in. drill bit (not included) to drill pilot
holes at marked locations. Then, install wall
mounting bracket (B) to mounting surface with
wood screws (AA).
WARNING: It is very important that you use
the proper hardware when installing the wall
mounting bracket (B) as this will support the fan
assembly (A).
5.
5
A
Slots
Remove set screw (G) at bottom of fan assembly
(A). With the wall mounting bracket (B) secured to
the wall and able to support the fan assembly (A),
you are now ready to hang the fan assembly (A).
Grab the fan assembly (A) firmly with two hands.
Align the four slots in the middle of the back of the
fan assembly (A) with the four hooks on the wall
mountng bracket (B) and then pull down firmly on
fan assembly (A).
WARNING: Falure to make sure all four hooks
on the wall mounting bracket (B) have engaged
completely with the four slots in the fan assembly (A)
and that the fan assembly (A) is stable may result in
injury or death.
Hooks
B
G
ASSEMBLY INSTRUCTIONS