Installation Guide

9. Install (4) 17-watt T8/CCT-3000 up to CCT-4100K/10,000
hour/F17T8 fluorescent bulbs (not included). Do not use any
other wattage of linear fluorescent bulb. Install the bulb into
the sockets (B) by aligning the pins of the bulb with the slot
in the sockets (B). Using your thumb and forefinger, press
the metal ends of the socket (B), and roll the bulb forward
until it rotates 90 degrees inside the socket (B), making
contact between the bulb pins and the socket (B) contacts.
ASSEMBLY INSTRUCTIONS
8. Attach the wire compartment cover (D) to the fixture (A)
using the screw (E). Make sure none of the wires are
protruding out of the wire compartment cover (D) before fully
tightening the screws.
11.
Push the diffuser locking catches in toward the
fixture pan (A) to lock the diffuser (C) in place. If one or
more of the locking catches does not properly lock,
make sure that the diffuser (C) is fully seated in the
pan. Once completed, restore power to your
electrical box.
10. To attach the diffuser (C), pull both of the locking
catches on the fixture pan (A) into the open position.
Place the lip of the diffuser (C) up and inside the
mounted fixture pan and hold into place (A).
9
10
11
B
A
A
A
C
C
A
D
8
E
5
Lowes.com/allenandroth