How to Guide

KITCHEN COUNTERTOP
MEASURE GUIDE
Countertops are sold by square footage (sq ft). Pricing is listed as price per sq ft. To estimate your pricing, use the steps below:
Tools Needed:
• Tape measure
• Pen
• Paper
• Calculator
How to Measure:
1. Draw a diagram of your countertop space on the paper.
2. Include the spaces for your sink, cooktop, bar sink, etc.
3. Indicate where there are walls in the space (if possible).
4. Measure the countertop length from wall to wall (in inches).
5. Write down the length in the appropriate space on your drawing.
6. Measure the depth of the countertops from the wall.
*Standard countertop depth is 26 inches (overhang of cabinets).
7. Repeat this process for every section of your countertop.
8. Make sure to measure bar tops, islands, peninsulas, etc.
DON’T FORGET TO TAKE A PICTURE OF YOUR SPACE
How to Calculate Sq Ft:
Subtotal =
Round up to whole number =
Length (x) Depth (=) Area (÷) 144 (=) Sq Ft
x = =÷ 144
x = =÷ 144
x = =÷ 144
x = =÷ 144
x = =÷ 144
Example:
SINK
RANGE
WALL
30-in
142-in
57-in
26-in
46-in
DISHWASHER
139-in
67-in
42-in
GET IT
INSTALLED
RESET601881_CORP_Services Measure Guide.pdf 1 3/5/20 9:09 AM
Upload your completed Kitchen Countertop Measure Guide at:
www.sagesurfaces.com/virtual-design