Installation Guide

Step 2: Gather Additional Tools Required

a w

Step 3: Install the Mounting Brackets

The shade may be installed either inside or outside the window frame. A

mounting bracket should be positioned about one to six inches from each end of

the head rail. For wider shades that require three or more brackets, these should

be spaced evenly between the two outermost brackets. Always position the

brackets where there is no interference with the cords and mechanisms inside

the head rail. The procedure outlined below will assure proper bracket placement.

To attach the brackets position head rail where the inner front edge of head rail

slides into slot at the front of mounting bracket. Push head rail upward until

flexible tab at the bottom of bracket snaps in place.

For outside mounting, attach the brackets to the head rail as described

the

the e ts

the at the

the

For inside mounting, clip the brackets onto the head rail as described

the a the re

where it t

Remove the brackets from the head rail and align them with the marks. Attach

each bracket using the 1 3/8-inch screws, pre-drilling the screw holes using a

3/32-inch drill bit.