Installation Guide

ManualsBrandsallen + roth ManualsSemi-Flush Mount LightsSF101NAN

EB16340

Questions, problems, missing parts? Before returning to your retailer, call our customer service

department at 1-866-439-9800, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.

Français p. 9

Español p. 17

Purchase Date

ATTACH YOUR RECEIPT HERE

welcoming • sophisticated • inspiring

allen + roth

is a registered trademark

3187807

ITEM #0806029

#0806028

MODEL #SF101FBZ

#SF101NAN

SEMI-FLUSHMOUNT CEILING FIXTURE

Summary of content (8 pages)

PAGE 1
welcoming • sophisticated • inspiring 3187807 allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. ITEM #0806029 #0806028 SEMI-FLUSHMOUNT CEILING FIXTURE MODEL #SF101FBZ #SF101NAN Français p. 9 ATTACH YOUR RECEIPT HERE Español p. 17 Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
PAGE 2
PACKAGE CONTENTS PART DESCRIPTION A QUANTITY Fixture 1 B Mounting Strap (preassembled to fixture (A)) 1 C Mounting Strap Screw (preassembled to fixture (A)) 2 A B C HARDWARE CONTENTS (shown actual size) AA Wire Connector Qty. 3 BB Machine Screw Qty. 2 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install or operate this product.
PAGE 3
SAFETY INFORMATION • DO NOT connect the bare or green insulation fixture ground wire to the black (HOT) current-carrying wire or the white (NEUTRAL) house wire. Connection of the bare or green fixture ground wire to the black or white house wires may cause metal parts of the fixture to carry electrical currents. Under this condition anyone coming in contact with the fixture will receive electrical shock, which could cause serious injury or death.
PAGE 4
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
PAGE 5
ASSEMBLY INSTRUCTIONS 3. Remove mounting strap (B) from fixture (A) by removing mounting strap screws (C) from the edges of the fixture (A). 3 B C Save mounting strap screws (C) for later use. C A 4. Attach mounting strap (B) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding.
PAGE 6
ASSEMBLY INSTRUCTIONS 5. Prepare wires by stripping 3/4 in. of insulation from wire ends using wire strippers (not included). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA). Connect BARE/GREEN ground wire from outlet box to BARE ground wire from fixture (A) with wire connector (AA).
PAGE 7
ASSEMBLY INSTRUCTIONS 7. Attach fixture (A) to mounting strap (B) using the mounting strap screws (C) previously removed (Step 3, Page 5). 7 B C NOTE: Before tightening mounting strap screws (C) completely, use level (not included) to check fixture (A) -- adjust if necessary. C A 8. Install one standard-base bulb (not included). Use either a 60-watt max. incandescent bulb or CFL/LED equivalent. CAUTION: When replacing bulb, please allow bulb and fixture (A) to cool down before touching.
PAGE 8
CARE AND MAINTENANCE • Shut off main power supply. Wipe with soft, damp cloth. Do not use an abrasive cleaner. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Bulb will not light. 1. Bulb is burned out. 2. Power is OFF. 3. Faulty connection. 1. Replace light bulb. 2. Make sure power supply is ON. 3. Check wiring and all connections. Fuse blows out or circuit breaker trips. 1. Crossed wires. 2.