Installation Guide

Table Of Contents

Contents include:

 TDBU Shade 

 Mounting Hardware Kit

Mounting Hardware Kit includes:

Part Quantity

a. Mounting Brackets 2 (for 18” to 36” widths)

3 (for 37” to 48” widths)

4 (for 49” to 72: widths)

b. 1” Screws 2 per bracket

c. Handle for Middle and Bottom Rail 1 (4 for shades over 59” wide)

Step 2: Gather Additional Tools Required

The following tools are not included, but will be needed to complete your

installation.

 Screwdriver

 Tape measure

 Pencil

 Drill

 Drill bits

 Step ladder

TIP: For dry wall or plaster mounting, use #6 plastic anchors (not included).

TIP: For screws, use 3/32-inch drill bit; for wall anchors, use ¼-inch drill bit.

Step 3: Install the Mounting Brackets

Your shade may be installed either inside or outside the window frame. A

mounting bracket should be positioned about 1 to 6 inches from each end of the