Installation Guide

ManualsBrandsallen + roth ManualsVanity LightsVBL3-27BZ

Model VBL3-27BZ

Model VBL3-20BNK

Model VBL3-12BNK

ITEM #0970854

0970855

0970856

MODEL #VBL3-12BNK

VBL3-20BNK

VBL3-27BZ

VANITY LIGHT

AB171074

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-866-439-9800, 8 a.m. - 6 p.m., EST, Monday - Thursday,

8 a.m. - 5 p.m., EST, Friday.

Purchase Date

ATTACH YOUR RECEIPT HERE

welcoming • sophisticated • inspiring

allen + roth

is a registered trademark

Français p. 9

Español p. 17

For Damp

Location

5005395

Summary of content (8 pages)

PAGE 1
welcoming • sophisticated • inspiring Model VBL3-27BZ Model VBL3-20BNK Model VBL3-12BNK 5005395 For Damp Location allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. ITEM #0970854 0970855 0970856 VANITY LIGHT MODEL #VBL3-12BNK VBL3-20BNK VBL3-27BZ Français p. 9 ATTACH YOUR RECEIPT HERE Español p. 17 Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. - 6 p.m.
PAGE 2
PACKAGE CONTENTS PART A DESCRIPTION QUANTITY Fixture 1 B Mounting Plate (preassembled to fixture (A)) 1 C Mounting Plate Screw (preassembled to fixture (A)) 4 A B C HARDWARE CONTENTS (shown actual size) AA BB Wire Connector Qty. 3 Machine Screw Qty. 2 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install or operate this product.
PAGE 3
SAFETY INFORMATION • DO NOT connect the bare or green insulation fixture ground wire to the black (HOT) current-carrying wire or the white (NEUTRAL) house wire. Connection of the bare or green fixture ground wire to the black or white house wires may cause metal parts of the fixture to carry electrical currents. Under this condition anyone coming in contact with the fixture will receive electrical shock, which could cause serious injury or death.
PAGE 4
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
PAGE 5
ASSEMBLY INSTRUCTIONS 3. Remove mounting plate (B) from fixture (A) by removing mounting plate screws (C) from the edges of the fixture (A). 3 C Save mounting plate screws (C) for later use. A B C C 4. Attach mounting plate (B) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding.
PAGE 6
ASSEMBLY INSTRUCTIONS 5. Unwrap BARE fixture wire from BLACK and WHITE fixture wires. Prepare wires by stripping 3/4 in. of insulation from wire ends using wire strippers (not included). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA).
PAGE 7
ASSEMBLY INSTRUCTIONS 7. Attach fixture (A) to mounting plate (B) using the mounting plate screws (C) previously removed (Step 3, Page 5). 7 NOTE: Before tightening mounting plate screws (C) completely, use level (not included) to check fixture (A) -- adjust if necessary. C A B C C 8. Restore power and test fixture (A). 8 A If lights do not function, please refer to TROUBLESHOOTING. CARE AND MAINTENANCE • Shut off main power supply. Wipe with soft cloth or use window cleaner.
PAGE 8
TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Light does not come on initially or no longer comes on. 1. Power is OFF. 2. Faulty connection. 3. LED component is not working properly. 1. Make sure power supply is ON. 2. Check wiring and all connections. 3. Contact Customer Service. Fuse blows out or circuit breaker trips. 1. Crossed wires. 2. Power wire is grounding out. 1. Check wiring. 2.