Installation Guide

ManualsBrandsallen + roth ManualsOutdoor Wall LightsWaldorf 11.25-in H Bronze LED Outdoor Wall Light

PH18732

Purchase Date

welcoming • sophisticated • inspiring

allen + roth

is a registered trademark

ATTACH YOUR RECEIPT HERE

ITEM #1085710

MODEL #WLL106BZ

OUTDOOR WALL LANTERN

Français p. 10

Español p. 19

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-866-439-9800, 8 a.m. - 6 p.m., EST, Monday - Thursday,

8 a.m. - 5 p.m., EST, Friday.

APPROVED FOR USE

IN WET LOCATIONS

800192

Summary of content (9 pages)

PAGE 1
welcoming • sophisticated • inspiring 800192 APPROVED FOR USE IN WET LOCATIONS ITEM #1085710 allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. OUTDOOR WALL LANTERN MODEL #WLL106BZ Français p. 10 Español p. 19 ATTACH YOUR RECEIPT HERE Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
PAGE 2
TABLE OF CONTENTS Package Contents ................................................................................................................2 Hardware Contents ...............................................................................................................3 Safety Information .................................................................................................................3 Preparation ......................................................................................
PAGE 3
HARDWARE CONTENTS (shown actual size) AA BB Wire Connector Machine Screw Qty. 3 Qty. 2 CC DD Allen Wrench Allen Screw Qty. 1 Qty. 1 (extra) SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install or operate this product. Failure to do so could lead to electrical shock, fire or other injuries that could be hazardous or even fatal.
PAGE 4
SAFETY INFORMATION WARNING • To avoid personal injury, the use of gloves may be necessary while handling fixture parts with sharp edges. • DO NOT suspend any fixture by the house wires. A fixture must always be mounted directly to an outlet box or to a mounting strap which is first attached to the outlet box. Wire connectors will not support the weight of a fixture.
PAGE 5
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
PAGE 6
ASSEMBLY INSTRUCTIONS 3. Remove mounting plate (C) from fixture (A) by removing mounting plate screws (E) and washers (F) from the fixture (A). 3 C Save mounting plate screws (E) and washers (F) for later use. A F E F 4. Attach mounting plate (C) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB).
PAGE 7
ASSEMBLY INSTRUCTIONS 5a. Unwrap BARE wire from BLACK and WHITE wires on back of fixture (A). Prepare wires by stripping 3/4 inch of insulation from wire ends using wire strippers (not included). 4 5a 5b. Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA).
PAGE 8
ASSEMBLY INSTRUCTIONS 7. Attach fixture (A) to mounting plate (C) using the mounting plate screws (E) and washers (F) previously removed (Step 3, Page 6). 7 F E A C NOTE: Before tightening mounting plate screws (E) completely, use a level to check fixture (A) -- adjust if necessary. F E 8. Loosen all four preassembled Allen screws (B) in fixture (A). Align slots in glass shade (D) with Allen screws (B). Tighten Allen screws (B) using Allen wrench (CC).
PAGE 9
ASSEMBLY INSTRUCTIONS 10. After completing installation, caulk fixture (A) mounting surface with silicone weather sealant (not included). WARNING: Failure to caulk fixture mounting surface with silicone weather sealant may result in water damage in outlet box, which may cause electrical malfunction or electrical shock. 10 A CARE AND MAINTENANCE • Shut off main power supply. Wipe with soft cloth or use window cleaner. Do not use an abrasive cleaner.