Installation Guide

ASSEMBLY INSTRUCTIONS

Attach mounting plate (C) to outlet box (not

included) using existing washers and outlet box

screws or the machine screws (BB). NOTE: If the

outlet box screws required for your outlet box are

of a different size than the machine screws (BB),

consult a licensed electrician before proceeding.

Use a level (not included) to adjust mounting plate

ceiling as needed. Tighten machine screws (BB)

to secure mounting plate (C).

CAUTION: The fixture must be mounted to an

outlet box that is supported by the building

structure and can support the weight of the fixture.

Plastic outlet boxes are not recommended.

Hardware Used

Machine Screw

x 2

Outlet Box

Remove mounting plate (C) from fixture (A) by

removing mounting plate screws (E) and washers

(F) from the fixture (A).

Save mounting plate screws (E) and washers (F)

for later use.

Washer