Installation Guide

ASSEMBLY INSTRUCTIONS
7
Connect WHITE wire from fixture (A) to WHITE
wire from outlet box using existing wire connector
or wire connector (AA). Connect BLACK wire from
fixture (A) to BLACK wire from outlet box using
existing wire connector or wire connector (AA).
Connect BARE/GREEN ground wire from outlet
box to BARE ground wire from fixture (A) with wire
connector (AA).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA)
provided with this fixture are designed to accept
only one 12-gauge house wire and two lead wires
from the light fixture. If your house wire is larger
than 12-gauge or there is more than one house
wire to connect to the corresponding fixture lead
wires, consult an electrician for the proper size wire
connectors to use.
Hardware Used
Wire Connector
x 3
AA
5b
Outlet
Box
BLACK
WHITE
AA
AA
BARE/GREEN
A
AA
Unwrap BARE wire from BLACK and WHITE wires
on back of fixture (A). Prepare wires by stripping
3/4 inch of insulation from wire ends using wire
strippers (not included).
4
4
5a
5a.
5b.
6.
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
Push wire connectors (AA) gently back into outlet
box. Carefully push excess wiring into outlet box.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
6
Outlet
Box
AA
AA
AA