Installation Guide

After completing installation, caulk fixture (A)

mounting surface with silicone weather sealant

(not included).

WARNING: Failure to caulk fixture mounting

surface with silicone weather sealant may result in

water damage in outlet box, which may cause

electrical malfunction or electrical shock.

Printed In China

KHLI1808

WARRANTY

The distributor warrants all of its lighting fixtures against defects in materials and workmanship for five (5)

years from the date of purchase. If within this period the product is found to be defective, take a copy of the

bill of sale as a proof of purchase and the product in its original carton to the place of purchase. The

distributor will, at its option, repair, replace or refund the purchase price to the consumer. All costs of

installation and removal of the fixture is the responsibility of the consumer. This warranty does not cover

fixtures becoming defective due to misuse, accidental damage or improper handling and/or installation and

specifically excludes liability for direct, incidental or consequential damages, improper packaging of returned

products and acts of God. As some states do not allow exclusions of limitations on an implied warranty, the

above exclusion and limitation may not apply. This warranty gives you specific rights and you may also have

other rights which may vary from state to state.

Light does not come on

initially or no longer

comes on.

Fuse blows out or

circuit breaker trips.

1. Power is OFF.

2. Faulty connection.

3. LED component is not working

properly.

1. Crossed wires.

2. Power wire is grounding out.

1. Check wiring.

2. Check all connections.

1. Make sure power supply is ON.

2. Check wiring and all connections.

3. Contact Customer Service.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

TROUBLESHOOTING

WARNING: Before beginning work, shut off the power supply to avoid electrical shock.

CARE AND MAINTENANCE

• Shut off main power supply. Wipe with soft cloth or use window cleaner. Do not use an abrasive

cleaner.

• DO NOT touch glass or metal on fixture while light is on; to do so could cause serious injury. Allow

glass and metal parts to cool before touching, dusting or cleaning the fixture.

• Total wattage for this fixture is 10 watts; do not attempt to replace the LEDs.

ASSEMBLY INSTRUCTIONS

10.