User Manual Grey Closet Tower

6 7

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

Hardware Used

Base Assembly

Hardware Used

1. Insert medium cam bolts (EE) into base panel left

(H), base panel right (I) and base panel top (J).

2. Attach base panel back (K) to base panel top (J) using

large wood dowels (FF) and large cam lock (DD).

Note: Make sure medium cam bolts (EE) previously

inserted into base panel top (J) are completely seated.

5. Fit base panel back (K) into slot of base panel bottom

(L), then attach base panel bottom (L) to assembly using

large wood dowels (FF) and large cam locks (DD).

Note: Make sure medium cam bolts (EE) previously

inserted into base panel right (I) are completely seated.

6. Attach base panel left (H) to assembly using large

wood dowels (FF) and large cam locks (DD).

Note: Make sure medium cam bolts (EE) previously

inserted into base panel left (H) are completely seated.

3. Attach base panel right (I) to assembly using large

wood dowels (FF) and large cam locks (DD).

Note: Make sure medium cam bolts (EE) previously

inserted into base panel right (I) are completely seated.

4. From the back of the assembly, attach base panel right

(I) to base panel back (K) using ﬂ at washers (CC), lock

washers (BB) and bolts (AA). Tighten with Allen wrench

(LL). Secure base panel top (J) with large cam locks (DD).

Medium Cam Bolt

Large Cam Lock

Allen Wrench

Bolt

Lock Washer

Flat Washer

Large Wood Dowel

x 12

x 2

x 4

x 2

x 1

x 3

x 2

x 5

x 3

Lowes.com/allenandrothLowes.com/allenandroth

Back Side